Basic Operations
SING ALONG
POWER 
VOLUME
PIANO BANK
SONG BANK
MODE
TONE
Number buttons
[+] /
This section provides information on performing basic keyboard operations.
To play the keyboard
1Press the POWER button to turn the keyboard on.
2Set the MODE switch to NORMAL.
3Use the VOLUME slider to set the volume to a relatively low level.
4Play something on the keyboard.
•The keyboard’s initial power on default setting is Song Bank Mode. The tone that is initially assigned to the keyboard is 096 FLUTE 1, which is the tone used by Song Bank tune number 00.
Selecting a Tone
This keyboard comes with 255
To select a tone
1Find the tone you want to use in the TONE List and note its tone number.
•Not all of the available tones are shown on the tone list printed on the keyboard console. For a complete list, see the “Tone List” on page
2Press the TONE button.
Indicator appears
•If you were in the Song Bank Mode when you pressed the TONE button, this will cause the SONG BANK button to flash. If you were in the Piano Bank Mode, the PIANO BANK button will flash. If you were in the Sing Along Mode, the SING ALONG button will flash.
3Use the number buttons to input the
Example: To select “049 ACOUSTIC BASS”, input 0, 4 and then 9.
A c o . B a s s
•Press the flashing button (SONG BANK, PIANO BANK or SING ALONG) to exit the tone select operation and stop the flashing.
NOTE
•Always input all three digits for the tone number, including leading zeros (if any). If you input one or two digits and stop, the display will automatically clear your input after a few seconds.
•You can also increment the displayed tone number by pressing [+] and decrement it by pressing
•When one of the drum sets is selected (tone numbers 246 through 254), each keyboard key is assigned a different percussion sound. See page
| ||
19 | 03.10.7, 4:27 PM |