Behringer UMA25S user manual Stand-alone mode, USB mode default, USB mode with Midi Thru default

Page 7

U-CONTROL UMA25S

1.3.1 Stand-alone mode

In case the USB connection is not available or detected, the UMA25S automatically switches to the stand-alone mode. In this mode, you can use the UMA25S to control external units via the MIDI output.

MIDI THRU

Fig. 1.4: Stand-alone mode

1.3.2 USB mode (default)

This is the default setting when the device is turned on. If the UMA25S is connected to a computer via USB, the keyboard automatically switches to this mode. In the USB mode, you can choose between 2 options: MIDI THRU or MIDI OUT.

1. USB mode with MIDI THRU (default):

Fig. 1.5: USB mode with MIDI THRU

In this mode, the keyboard messages are sent to the computer via USB. The messages from the computer are transmitted to the UMA25S (data reception) and simultaneously to all MIDI units which are connected to MIDI OUT. This mode is ideal for playing the keyboard and controlling further MIDI hardware (samplers, rack synthesizers, etc.) with the sequencer.

1. Introduction

Image 7

Contents UMA25S Control Control UMA25S Important safety instructionsUMA25S Foreword Table of contentsInitial operation IntroductionBefore you get started ShipmentOnline registration Hardware configurationProduct contents System requirementsUSB mode default Stand-alone modeUSB mode with Midi Thru default Driver installation Software installationMusic software Controls and connections Control UMA25SUMA25S as audio interface Rear panel connectorsReal-time control using the control elements PresetsUMA25S as USB/MIDI controller Octave and Transpose functions Changing the velocity curveHow does it work? Mute function Assignment of control elements using the Learn functionMMC function Panic functionAssignment of control messages in Edit Mode Program Change and Midi Bank Select Midi MessagesExample CC messages triggered by keys Triggering Note messages using push buttons switch elementsControl Changes NrpnMidi Machine Control MMC Using keys as control elementsPitch Bend After-TouchChannel Assign function More functions in Edit ModeShow Element function Channel Array functionSettings in Global Mode Factory Reset restoring default presets SpecificationsMMC Frame Rate Select Octave Position AppendixGS/XG-Parameter Type Display MusicalE11 ElementValue E10Warranty