Pioneer DJm-909 operating instructions Front Panel

PART NAMES AND FUNCTIONS

Front Panel

52 53

FADER REVERSE						FADER START				PHONES
CH-1	C.F.	CH-2				C.F. 1	CH-1	C.F. 2	CH-2	54
ON	ON		ON
OFF	OFF		OFF	PROFESSIONAL 2CHANNEL MIXER
				DJM-909
				FADER CURVE						POWER
FOOT SW			CH-1	CROSS FADER 1	CROSS FADER 2	CH-2
										55
	CH-1			FADER CUT LAG
	OFF			MIN	MAX
	CH-2
58	57			56

52FADER REVERSE switches

CH-1 ON/OFF

When set to [ON], the top panel’s CH-1 REVERSE indicator lights, and the CH-1 fader lever operates in the reverse direction (scale mark “0” becomes 0 dB attenuation, and “10” becomes minus infinity). The fader start function also operates in reverse.

CH-2 ON/OFF

When set to [ON], the top panel’s CH-2 REVERSE indicator lights, and the CH-2 fader lever operates in the reverse direction (scale mark “0” becomes 0 dB attenuation, and “10” becomes minus infinity). The fader start function also operates in reverse.

C.F. ON/OFF

When set to [ON], the top panel’s cross fader REVERSE indicator lights, and the cross fader lever operates in the reverse direction (left side becomes CH-2, and right side becomes CH-1). The fader start function also operates in reverse.

53FADER START selector switches

C.F.1 / CH-1

This switch determines whether the fader start operation for the CD player connected to CH-1 is activated by the cross fader lever, or by the CH-1 fader lever.

When the top panel’s CH-1 FADER START button is set to On, selecting [C.F.1] causes the top panel’s C.F.1 FADER START indicator to light, and selecting [CH-1] causes the top panel’s CH-1 FADER START indicator to light.

C.F.2 / CH-2

This switch determines whether the fader start operation for the CD player connected to CH-2 is activated by the cross fader lever, or by the CH-2 fader lever.

When the top panel’s CH-2 FADER START button is set to On, selecting [C.F.2] causes the top panel’s C.F.2 FADER START indicator to light, and selecting [CH-2] causes the top panel’s CH-2 FADER START indicator to light.

54Headphone output jack (PHONES)

Accepts a 6.3 mm stereo headphones plug.

55POWER switch

56Fader attenuation dials (FADER CURVE)

CH-1

Use to adjust CH-1’s fader attenuation curve.

CH-2

Use to adjust CH-2’s fader attenuation curve.

CROSS FADER 1

Use to adjust cross fader’s CH-1 attenuation curve.

CROSS FADER 2

Use to adjust cross fader’s CH-2 attenuation curve.

FADER CUT LAG

Use to adjust mechanical play at both extremes of the cross fader movement (the range in which lever movement produces no effect).

(See page 17, “Fader attenuation curve adjustment”.)

57 Foot switch channel select switch (FOOT SW CH-1/OFF/CH-2)

Use to select whether the Effect On/Off foot switch function operates on channel 1 [CH-1], channel 2 [CH-2]. When the switch is in the center position, both CH-1 and CH-2 are [OFF].

58 Foot switch jack (FOOT SW)

This 6.3 mm RCA jack can be used to connect an On/Off type pedal switch used to turn effects On and Off.

Various types of foot switch are available; some turn On when pressed, some turn Off when pressed, and others have locking mechanisms (alternate On/Off with successive presses). Select the type in accordance with your own preferences.

12

<DRB1349>