Pioneer DJm-909 operating instructions Fader Operations, Cross fader start play and back cue play

FADER OPERATIONS

Cross fader start play and back cue play

When the CH-1 CD player is held in standby at the cue point, merely moving the cross fader lever from the right (CH-2) side to the left (CH-1) side will cause the CH-1 CD player to begin playback.

When the cross fader lever reaches the left (CH-1) side, CH-2 CD player performs back cue (returns to its cue point). Likewise, when the CH-2 CD player is in standby at its cue point, moving the cross fader lever from the left (CH-1) side to the right (CH-2) side causes CH-2 CD player to begin playback. When the cross fader lever reaches the right (CH-2) side, CH-1 CD player performs back cue.

*Back cue is performed even if the input selector switch is not set to CD.

Start playback with channel fader

1To control a connected CD player, set the front panel FADER START selector switch for the corresponding channel to its [CH-1] or [CH-2] position.

When using the CH-1 fader lever to start the CH-1 CD player, set the front panel C.F.1/CH-1 switch to the [CH-1] position; when using the CH-2 fader lever to start the CH-2 CD player, set the front panel C.F.2/CH-2 switch to [CH-2] position.

FADER START

C.F. 1 CH-1 C.F. 2 CH-2

÷If the cue point has already been set, there is no need to set the CD player again for standby at the cue point.

÷After playback has once begun, moving the channel fader lever back to the “0” scale mark will cause the CD player to return to its cue point and enter the standby mode again (back cue).

Start playback with cross fader

1To control a connected CD player, set the front panel FADER START selector switch for the corresponding channel to its [C.F.1] or [C.F.2] position.

When using cross fader lever to start the CH-1 CD player, set the front panel C.F.1/CH-1 switch to the [C.F.1] position; when using the cross fader lever to start the CH-2 CD player, set the front panel C.F.2/CH-2 switch to [C.F.2] position.

FADER START

C.F. 1 CH-1 C.F. 2 CH-2

2Press the top panel FADER START button so that the indicator lights.

When the CH-1 FADER START button is pressed, the C.F.1 FADER START indicator lights.

When the CH-2 FADER START button is pressed, the C.F.2 FADER START indicator lights.

2Press the top panel FADER START button so that the indicator lights.

When the CH-1 FADER START button is pressed, the CH-1 FADER START indicator lights.

When the CH-2 FADER START button is pressed, the CH- 2 FADER START indicator lights.

3Move the cross fader lever to the side opposite from the channel you wish to start.

4Adjust the CD player to its cue point and set for

cue point standby.

5Begin moving the cross fader lever with the timing you wish, thereby beginning playback on the CD player.

3Set the channel fader lever to the [0] scale mark.

4 Adjust the CD player to its cue point and set for cue point standby.

5 Begin moving the channel fader lever with the timing you wish, thereby beginning playback on the CD player.

FADER START

C.F.1 FADER START

REVERSE

FADER START

REVERSE REVERSE

FADER START

1

2

FEELING ADJ.

CH-1CH-2

	10
	9
	8
	7
	6
	5
CH-1 FADER START	4
	3
	2
	1
	0

10

9

8

7

6

5

4CH-2 FADER START

÷If the cue point has already been set, there is no need to set the CD player again for standby at the cue point.

÷If the cross fader lever is moved fully after the beginning of playback, the opposite channel’s CD player will return to its cue point and enter standby there (back cue).

18

<DRB1349>