Power Acoustik power acoustik manual AC Power Socket

USER’S GUIDE:

13

14

15

16

17

8

9

10

11AC POWER SOCKET

This is a standard 3_ prong IEC connector. Connect the detachable line cord (included with your machine) to the power receptacle, and plug the other end of line cord into an outlet.

12FUSE

These speaker have been designed to adapt to both American voltage standard (110VAC-120VAC,60HZ)

and European Standard(220VAC-240VAC,50HZ).The fuse is designed to adapt to these two standard, but before plugging a speaker into an outlet ,please ensure the fuse is on the right side. Originally, it is placed to adapt to American voltage standard, if you want to plug into a European standard voltage, please revise the side of the fuse.

13LCD SCREEN

14MIC/LINE GAIN

This is used to adjust the signal level going into the built-in power amplifiers, from off up to 10dB gain.

15LINE GAIN

16HIGH AND LOW EQ

Use the EQ controls to make overall adjustments to the sound of the machine.

The HIGH EQ provides a boost or cut of up to 15 dB for the high frequency. The frequencies include the sizzle of the cymbals, the edge of a guitar, or the upper harmonics of vocals.

In general, boosting the HIGH EQ will brighten the sound of the louder speaker.

The low EQ provides a boost or cut of up to 15dB for the low frequencies. These frequencies are represented by the punch in bass drums, bass guitar, and some really serious signers.

17iPOD DOCK

This is the station for your iPOD or iPHONE, whenever you want to play your iPOD or iPHONE with the speaker, you should first put your iPOD or iPHONE in play status and then insert it to the iPOD DOCK properly.

8