1)High Input Jack: Connect high level devices to this jack.
2)Low Input Jack: Connect low level devices to this jack.
3)Gain: This sets the volume gain level for Channel 1.
4)Bass: This control adjusts the low frequency level.
5)Treble: This control adjusts the high frequency level.
6)Reverb: Switches on/off the reverb effect for Channel 1.
1)Power Switch: Switches amplifier on/off.
2)Power Cord: Connect the included power cord here. Plug into a grounded power outlet only!
3)Phones: This is your headphone connection. Inserting the headphones disables the internal speaker (great for practicing).
4)Line Out: Lets you output a line level signal
5)Return: Use this jack to bring back processed signal (see 6).
2
www.pyleaudio.com
7)Channel 2 Controls: Same as for Channel 1.
8)Reverb level: Adjusts overall reverb level for both channels.
9)Distortion: Adjusts overall distortion effect. Turn to off for no effect.
10)Power LED: Illuminates when power is switched on.
11)Master: Adjusts overall volume.
6)Send: This jack lets you insert an effects processor into the signal path.
7)Reverb Remote: Connect a footswitch (not included) to remotely switch on/off the internal reverb effect.