N300 WiFi Range Extender
Factory Default Settings
The following table includes the factory settings for the extender. You can use the Factory Reset button or the Erase feature to return the extender to these settings. (See Return the Extender to Its Factory Settings on page 24.)
Table 3. Factory Settings
Feature | Setting |
|
|
Setup Wizard | Enabled |
|
|
Wireless communication | Enabled |
|
|
Wireless network names (SSID)s | NETGEAR_EXT |
|
|
Security | Disabled |
|
|
Transmission speed | Auto1 |
Country/region | Varies by region |
|
|
Operating mode | 802.11n, 802.11g, 802.11b |
|
|
Data rate | Up to 300 Mbps |
|
|
DHCP | Client enabled |
|
|
1.Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
Technical Specifications
The following table includes the product specifications.
Table 4. Technical specifications
Extender Specifications
Network protocol and standards | Data and routing protocols: TCP/IP, DHCP server and client, DNS relay | |
compatibility |
|
|
|
| |
Power consumption | ||
|
|
|
Physical specifications | • | Dimensions: 67 x 55 x 34 mm (2.64 x 2.17 x 1.34 in.) |
| • | Weight: 98 g (3.46 oz) |
|
|
|
Supplemental Information
34
