Get to Know Your Extender | NETGEAR EX2700 guide

1. Get to Know Your Extender		1
1. Get to Know Your Extender

This chapter covers the following topics:

•Meet Your Extender

•How the Extender Works

•When to Use Your Extender

For more information about the topics covered in this manual, visit the support website at http://support.netgear.com.

Firmware updates with new features and bug fixes are made available from time to time on downloadcenter.netgear.com. Some products can regularly check the site and download new firmware, or you can check for and download new firmware manually. If the features or behavior of your product does not match what is described in this guide, you might need to update your firmware.

Page 4

Image 4

NETGEAR EX2700 user manual Get to Know Your Extender

Contents

N300 WiFi Range Extender Compliance SupportTrademarks Contents Get to Know Your Extender Meet Your Extender LEDs When to Use Your Extender How the Extender Works Install Your Extender Place the Extender and Apply Power Connect to an Existing WiFi Network To place the extender and apply power  To connect with WPS Connect with Netgear genie Smart Setup  To connect with the browser-based Smart Setup Install Your Extender Cable a Computer or Device to the Ethernet Port Extender WiFi Performance To cable a computer to the extender Ethernet port  To cable a device to the extender Ethernet port Settings Log In to the Extender After Initial Setup Change the admin Password To log in to the extender after the initial setup  To change the password for the extender Select Maintenance Set Password Use the Setup Wizard to Connect the Extender to a NetworkSelect Setup Wizard Manage the Extender Network and Settings View or Change Wireless Settings  To view or change the wireless settingsAdd a WPS Client to the Extender Network  To add a WPS client Select Setup Wireless Settings View or Change Advanced Wireless Settings To view or change the advanced wireless settings Set Up a Wireless Access List Select Advanced Wireless Settings  To set up and enable the access list Select Setup IP Address Setup Set Up the Extender to Use a Static IP Address To specify a static IP address Monitor and Maintain the Extender Back Up the Extender Configuration Restore Saved Configuration Settings To back up the extender configuration settings Select Maintenance Backup Settings Return the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings  To restore factory settings  To erase the extender’s current settings Upgrade the Firmware Select Maintenance Firmware Upgrade View Wired and Wireless Network Devices To view devices on the network Select Maintenance Network Devices FAQs and Troubleshooting FAQs Cannot Log In to the Extender  To use the extender with a MAC filter on the router Cannot Join the Extender WiFi Network Connection was not established to the selected network Supplemental Information Factory Default Settings Technical Specifications N300 WiFi Range Extender Technical specifications

1. Get to Know Your Extender