N300 WiFi Range Extender
CAUTION:
If you use a wireless device to set up the access list, add your wireless device to the access list. Otherwise, you are disconnected when you click the Apply button. To avoid this situation, use a computer with a wired connection to access the extender.
Before you enable the access list, you must add the MAC addresses of the wireless devices that you want to grant access to the WiFi network of the extender.
To set up and enable the access list:
1.On your computer, launch a web browser.
2.In the address field of your browser, enter http://www.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt, make sure to include http:// when you type http://www.mywifiext.net in your browser.
3.Type admin for the user name and type your password.
If you did not personalize your password, type password for the password.
4.Select Advanced > Wireless Settings and click the Setup Access List button. The Wireless Card Access List screen displays.
5.Click the Add button. The screen adjusts.
6.In the Device Name field, type a name for the wireless device.
7.In the MAC Address field, type the MAC address of the wireless device.
8.Click the Apply button.
9.Above the list, select the Turn Access Control On check box.
Manage the Extender Network and Settings
20
