Solid State Logic AWS V4 specs

11. Setting you workstation(s) to communicate via ipMIDI

The AWS Logictivity software enables 12 MIDI ports which are pre-assigned as follows:

Port	Layer	Assignment	Port	Layer	Assignment

1	1	Faders 1-8	9	-	AWS MIDI port 1

2	1	Faders 9-16	10	-	AWS MIDI port 2

3	1	Faders 17-24	11	-	-

4	2	Faders 1-8	12	-	-

5	2	Faders 9-16	13	-	-

6	2	Faders 17-24	14	-	-

7	-	MTC Input	15	-	-

8	-	SysEx	16	-	-

Note that there are now two switchable workstation layers allowing two independent workstations to be interfaced. Once configured, you can switch between the two layers using the console’s SSL/DAW menu.

Port 7: If your console has AWSomation, this port is used for MIDI Time Code (MTC).

Port 8: Used for the import and export of legacy SysEx TR and AWSomation data.

Port 9-10: Mapped to the conventional MIDI connectors on the rear of the console.

NOTE: In addition to ipMIDI port 7, hardware MIDI port 4 on the rear of the console is also hard coded as an MTC input. To avoid contention, only use one of these two MTC ports at any one time.