before you disconnect it from the key- board.
1.Slide POWER to OFF.
2.Set the AC or DC adapter’s voltage switch to 9V.
3.Insert the Adaptaplug adapter into the adapter’s cord so it reads + TIP.
4. Connect the AC or | DC 9V |
DC adapter’s bar- |
|
rel plug to the DC |
|
9V jack on the |
|
back of the key- |
|
board. |
|
5.Plug the AC or DC adapter’s other end into a standard AC outlet or your vehi- cle’s
CONNECTING
HEADPHONES
To listen to your keyboard without disturbing others, you can connect an optional pair of stereo headphones with a
Insert the headphones’ plug into the PHONE jack on the back of the keyboard.
Note: Connecting headphones disconnects the keyboard’s
Listening Safely
To protect your hearing, follow these guide- lines when you use headphones.
•Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level.
•Do not listen at extremely high volume levels. Extended
•Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.
CONNECTING AN EXTERNAL AMPLIFIER
To amplify your keyboard’s sound, you can connect it to an optional external amplifier using an audio cable with a
To connect an external amplifier to your key- board, insert the cable’s plug into the PHONE jack on the back of the keyboard, and con- nect the cable’s other end to the amplifier’s input jack(s) (such as AUX IN or TAPE IN).
Your local RadioShack store sells a full line of amplifiers, speakers, and connection ca- bles.
4 | Preparation |