Video Loss Alarm
The IPR Software supports a Video Loss Alarm function, which allows an Alarm Event to log when a camera loses its signal. The lost signal can be due to Power failure to the network device, the network device cable being cut or unplugged, or the network device being damaged in some way.
Video Loss Alarm Beep | When Video Loss occurs the speaker attached to the IPR will sound an alarm. |
|
|
Video Loss Alarm Log | Records the Video Loss Alarm Events to the log files. |
|
|
Hybrid Sensor Setup
This interface is used to link Hard Contact Sensor Inputs from supported Network Devices to the IPR Software.
Volume
The volume control allows fine tuning of the volume settings on the IPR.
Volume Options:
•Slider Controls – Used to adjust the literal volume for the respective devices listed.
•Mute Checkbox – Check the mute box to mute volume on any of the device columns or check the Mute All checkbox to mute all volume on the IPR.
47