PTZ Address Settings
Some protocols support software address settings.
The RX Addresses and ID settings are compatible with a particular line of receivers that support 2 ID addresses
The PT Driver Address is associated with the PTZ ID address set on the camera. The addresses must match for the IPR to communicate with the proper PTZ camera. This is especially important when a large number of PTZ cameras are connected to the IPR.
NOTE: To select a PT Driver Address of
ACCESSING PTZ MENUS
Some protocols support the ability to access the Internal PTZ Onscreen Menu
Since every PTZ camera is different, the functions of these options can vary slightly.
The Surveillix IPR provides an easy way to access |
| Arrow buttons |
| ||
|
| |
the cameras options. For explanations of what those |
|
|
options are please refer to the manual that came with |
|
|
the camera |
|
|
NOTE: Use the arrow buttons on the PTZ controller |
|
|
move through the PTZ Menu options and/or highlight |
|
|
options. |
|
|
Open PTZ Camera Menu |
| Select Item on Menu |
| Close PTZ Camera Menu | |
|
|
72