46
VAIO Digital Studio System Reference Manual
9 Slide the drive holder back into the chassis so that the edge of the holder is flush with the chassis.
10 Push in on the tab (A) to securely latch the holder to the chassis.
C
Drive connectors
Power connectors
B
E
D
Tab
A
Disk drive holder
11 Connect the inner drive cable connector (B) to the first drive.
12 Connect the outer drive cable connector (C) to the second drive.
13 Connect the first power connector (D) to the first drive.
14 Connect the second power connector (E) to the second drive.
15 Replace the side panel (see “Replacing the Side Panel” on page 27).
16 Reconnect the power cord to the system and then turn on your computer.