The advanced serial control jack shall employ the use of a standardized device control protocol that is commonly accepted and understood by control systems manufacturers. This control jack shall accept and transmit
The parallel (contact closure) control jack shall employ the use of standardized device control protocol that is commonly accepted and understood by control systems manufacturers. This control jack shall accept and transmit commands based on the state of specific contacts, when shorted to ground. This method shall provide limited control over the device, and provide acknowledgement to the control system of the received command.
The following device functions shall be available for control using this method.
A/V source selection
Volume control
Muting
Scene recall
Projector power on / stand by
Emergency override
The IR (Infrared) control capability shall employ the use of standardized device control protocol that is commonly accepted and understood by control systems manufacturers. Through the use of an external Universal (learning) IR remote control unit, this method shall provide limited control over the device.
The following device functions shall be available for control using this method.
Projector power on / standby
AV/RGB source selection
Master volume adjustment
Master muting
The serial control output jack shall employ the use of standardized device control protocol that is commonly accepted and understood by control systems manufacturers. This control jack shall transmit
The following device functions shall be available for control using this method.
Power On / Standby
Input Selection