9. Extension Speaker Jack
This is where you connect a 4 Ohm extension speaker cabinet.
IMPORTANT NOTE: Connecting an extension speaker here mutes the internal speaker. For optimum performance we strongly recommend the following:
a)Only use extension cabinets with an imped- ance of 4 Ohms or more (e.g. 8 Ohms ) with these combos. NEVER use a lower impedance (e.g. 2 Ohms) or damage could result.
WARNING: If you use an extension cabinet with an impedance of more than 4 Ohms your
b)DO NOT use a speaker cabinet with a Wattage rating that is less than 60 Watts. If you ignore this warning, you could end up blowing a speaker - and that's not recommended!
c)ALWAYS use a good quality speaker cable (unshielded) to connect an external cabinet - NEVER use a guitar (shielded) cable.
10.Power Switch
Um...believe it or not, this is how you turn on power to the amplifier! Assuming it's plugged in to a working outlet!! It is plugged into a working outlet right? Good...
THE REAR PANEL
EFFECT SEND and RETURN Jacks
This is where you can connect your favorite effects processor. (e.g. ToneWorks AX1B!!) to the
SETTINGS DIAGRAMS
| INPUT | HEADPHONE Jack | EXTENSION |
| SPEAKER | ||
| Jack | ||
|
| Jack | |
|
|
| |
| EFFECT SEND Jack |
|
|
| EFFECT RETURN Jack |
| Cabinet |
Input | Output |
|
|
|
| VOX |
|
| Effects processor. etc |
|
SPECIFICATIONS
•Dimensions (W x D x H): 473 x 350 x 455mm / 18.62" x 13.78" x 17.91"
•Weight: 17.3Kg / 38.14lbs.
•Output Power : 60 Watts (RMS)
•Speaker: VOX custom 1x12" and 1x tweeter horn
•Inputs: INPUT jacks (Active & Passive), EFFECT RETURN jack.
•Outputs: Headphone jack, Extension Speaker jack, EFFECT SEND jack
•Controls: Volume, Treble,
*Specifications are subject to change without notice.
*Company names, product names, and names of formats etc. are the trademarks or registered trademarks of their respective owners.
IMPORTANT REMINDER: Your VOX
© 2001 VOX AMPLIFICATION LTD. Printed in Korea