Roland VR-700 Equalizer Settings, Pedal, Bend Lever, and Foot Controller Settings, OFF, on Piano

Various Settings (Function mode)

Equalizer Settings

The VR-700 contains a three-band equalizer. When you turn on the EQ Switch (equalizer switch), the equalizer will apply to all organ sounds, ensemble sounds, and the playback of the player.

With the Group already selected, press the [+] button or [–] button until is shown in the display.

*Settings for the following parameters are saved in system memory. After editing these, press the [WRITE] button to save the settings in system memory (p. 51).

Button	Parameter	Value	Factory setting
[PIANO]	EQ Switch	OFF, ON	OFF
[E.PIANO]	EQ Input Gain	-15–0–+3 (dB)	0 (dB)
[STRINGS]	EQ Low Gain	-12–0–+12 (dB)	0 (dB)
[CHOIR/SCAT]	EQ Mid Freq	200, 250, 315, 400, 500, 630, 800 (Hz)	800 (Hz)
		1.00, 1.25, 1.60, 2.00, 2.50, 3.15, 4.00, 5.00, 6.30, 8.00 (kHz)
[BRASS]	EQ Mid Gain	-12–0–+12 (dB)	0 (dB)
[SYNTH LEAD]	EQ High Gain	-12–0–+12 (dB)	0 (dB)

* The shaded parameters are stored in system memory.

Pedal, Bend Lever, and Foot Controller Settings

With the Group already selected, press the [+] button or [–] button until is shown in the display.

*Settings for parameters other than Bend Range are saved in system memory. After editing these, press the [WRITE] button to save the settings in system memory (p. 51).

*The Bend Range setting is saved separately for each favorite.

Button	Parameter	Value		Factory setting
[PIANO]	Damper Pedal Polarity		: Normal	Normal
[E.PIANO]	Control Pedal Polarity		: Reverse	Normal
		Refer to “Functions that can
[STRINGS]	Control Pedal Assign	be assigned to the control		Rotary speed
		pedal” (p. 55)

[CHOIR/SCAT]

Bender Range

0–24 (semitones)

–

[BRASS]

D Beam Sensitivity

1–127

127

* The shaded parameters are stored in system memory.

54