Roland HP103 owner manual Recording a New Song, 6,7,8 5,7

Page 31

Chapter 4. Recording Your Performance

Recording a New Song

Record only the keyboard performance without playing along with an internal song.

fig.panel4-1

3

2

1 4 6,7,8 5,7

Recording settings (select “USr”)

1 Press the [Song/Tempo] button, getting its indicator to light in red.

The song number appears in the display for several seconds.

2 Press [-] and [+] buttons simultaneously, and “USr” appears in the

display.

Specifying the tone and tempo for recording

3 Select the tone that you want to play (p. 16).

4 If necessary, turn on the metronome.

Sound the metronome while you set the tempo and beat of the song (p. 25).

5 Press the [Rec] button.

The [Rec] button’s indicator will light, the [Play] button’s indicator will blink, and you will be in recording-standby mode.

Start recording

6 Recording will start when you either press the [Play] button or play the

keyboard.

Two measures of the count sound are played, and the recording begins.

Note that recording will also begin as soon as you play anything on the keyboard, even if you do not press the [Play] button. There is no count sound played when you start in this manner.

When recording begins, the [Play] button and [Rec] button indicators will light. Go ahead and perform on the keyboard.

Stop recording

7 Press the [Play] or [Rec] button.

Recording will stop, and the indicators for the [Play] and [Rec] buttons will go dark.

Play back the recorded performance

8 Press the [Play] button.

You will hear the recorded performance.

Once again press the [Play] button, and playback will stop.

NOTE

If you layer a newly recorded performance without erasing the recorded song, the song tempo and beat will be stored with the settings that were recorded first.

About the “USr” display

When you stop recording, the

“ ” display will change

to “ .”

The “.” in the lower right of the display indicates that there is already a recorded performance.

When recording songs that start on an upbeat (that start on a beat other than the first beat of the measure), press the [Rec] button to put the HP103 into recording standby, then press the [Play] button. Two measures of count sound are played, and then recording begins.

If you record without specifying the recording track, the performance will be recorded to the [Left] button. If you want to record the right and left hands separately on separate recording tracks, refer to “Selecting and Recording the Track for Each Hand Separately” (p. 33).

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Comfortable for Use with Headphones Main FeaturesPursuing the Playing Feel of a Grand Piano Important Safety Instructions 001 002a Protect the unit from strong impact. Do not drop it For HP103-PE Power SupplyPlacement MaintenanceAdditional Precautions Contents Front Panel Panel DescriptionsInput jacks Rear PanelBefore You Start Playing Connecting the Pedal CordConnecting the Power Cord Setting Up the Music RestUsing the Headphones Hook Connecting HeadphonesTurning the Power On and Off Using the Music HoldersAbout the Adjuster Adjusting the Sound’s Volume and BrillianceAbout the Pedals Choosing the song to play back Listening to Internal SongsSelecting a Song and Playing It Stopping the playbackStopping the Tone Demo Songs Listening to the Demo SongsPlaying Back the Tone Demo Songs Press the Demo buttonStopping the Demo of the Functions Button assigned function Demo content Grand SpaceListening to a Demo of the Functions Press any of the following buttonsSelecting variation tones PerformancePerforming with a Variety of Sounds Selecting a tone groupRed Adjusting the Keyboard Touch Key TouchIndicator Settings Press the Key Touch buttonAdding a Sense of Depth to the Sound Grand Space Changing the Grand Space SettingsHold down the Grand Space button, and press the or + button Adding the Right Sense of Depth for Headphones Grand Space Hold down the Dynamics button, and press the or + button Press the Dynamics button, getting its indicator to lightChanging the Dynamic Emphasis Settings Adding Liveliness to the Sound Dynamic EmphasisChanging the depth of the reverb effect Applying Effects to the SoundAdding Reverberation to the Sound Reverb Press the Reverb buttonFig.panel2-6 Transposing the Key of the Keyboard TransposePress the or + button to change the value Adjusting the Volume Balance in Dual Play Dual BalancePlaying Two Sounds Together Dual Play Hold down the Transpose button and press the Split buttonPress the Tone button Press the Split buttonChanging tone played by the left hand Changing tone played by the right handSounding the Metronome Using Metronome2, 4 1 Changing the Keyboard’s Split PointStopping the metronome Changing the Metronome VolumeChanging the beat of metronome Hold down the Song/Tempo button, and press the or + buttonFig.panel3-1 To exit the function, press the Split button Adding a Count-in to Match the Timing Count-In Changing the TempoStopping the song Playing Each Hand SeparatelySelecting the part that you yourself will play Playing back a songIf you see the following Recording Your Performance6,7,8 5,7 Recording a New SongSelecting the track to record Recording Along with a Song3 6,7,8 4,7 Selecting the song to record5,6 2,5 Selecting and Recording the Track for Each Hand SeparatelyAs necessary, turn on the metronome p Press the Rec button Hold down the Song/Tempo button and press the Rec button Erasing Recorded PerformancesErasing a Performance from the Specified Track Erasing a SongMaking Detailed Settings Function Changing Various SettingsChanging the Damper Pedal’s Resonance Changing the Temperament Tuning to Other Instruments’ Pitches Master TuningTonic Changing How Grand Space is Applied Grand Space Mode Setting the Tuning Curve Stretch TuningApplying the Damper Pedal to Left-hand Keyboard Area How to Use the V-LINK Using the V-LINK functionDisabling Everything Except Piano Play Panel Lock Connection Examples Connecting External DevicesConnecting to a Computer Connecting to Audio EquipmentSetting various functions Connecting Midi DevicesWhat’s MIDI? Transmitting a Performance You Recorded Midi Send Channel SettingsSwitching Local Control on Off Value Power-up default settingCase Cause/Remedy TroubleshootingDisplay Meaning Error Messages/Other MessagesSplit Off Split On Tone ListSong Song Name Composer Copyright Internal Song ListProfile John Maul Internal Song ListHold down the button and press the or + button Easy Operation ListMidi Implementation Chart Main Specifications Midi IndexMemo Memo Memo Information Avis 03679534 ’05-4-3N
Top Page Image Contents