Roland F-100 owner manual Assembling the Lid, Installing the Lid Holders

Before You Play

Assembling the Lid

NOTE

You must always use both hands to open or close the lid. When opening and closing the lid, be very careful not to catch your finger in the lid.

1.Attach the included lid as shown in the diagram.

fig.00-04

Lid

Projection Keyboard

2.When opening the lid, grasp the lid with your hands and gently lift it upwards.

3.When closing the lid, grasp the lid with your hands and gently lower it down.

NOTE

Make sure an adult is on hand to provide assistance when young children are playing the F-100.

NOTE

When you move the piano, be sure to remove the lid to prevent accidents. Be careful not to drop the removed lid.

■Installing the Lid Holders

Attaching the supplied lid holders provides you with a place to rest the lid whenever it's been removed.

Check the Parts

Lid Holders (left and right) Attachment screws (4)

Installation Procedure

1.1.Remove the four screws from both sides of the rear panel of the F-100.

*Be careful not to lose the screws you've removed. You will need to put them back in place at the rear of the F-100 if you decide that you don't want to use the lid holders.

Remove the screws at both ends

2.Attach the lid holders to the rear panel of the F- 100 using the supplied attachment screws (four locations).

Lid Holder

Attachment screws

Placing the Lid

Rest the lid on the lid holders gently, as shown.

Lid	Align the ends of
	the lid with the
	corners of the lid holders

Lid Holder

NOTE

Never lean against, nor apply excessive force to the lid while

it is resting on the lid holders.

11