Changing the Volume Balance in Dual Play

Convenient Functions

Transposing without Changing Your Fingering— Key Transpose

You can play in a different key-without changing the keys you are playing. This function is called “Key Transpose.” When you are accompanying a singer, you can use Key Transpose to match the vocal pitch of the singer, allowing you to transpose easily while using the same printed music (keyboard fingering).

Key transpositions remain in effect until the keyboard’s power is turned off.

*The transposition setting is effective only on sounds performed on the DP-1000’s keyboard. This setting is not effective on tones from external MIDI messages played on the DP-1000.

<Ex.> Using the C Major Keys to Play a Song in E Major

1.While holding down the [Key Touch/Demo Song] button, press the tonic (root) of the

key to which you want to transpose.

Use the C2–B2 notes to select the tonic.

Refer to “Functions Assigned to the Keyboard” (p. 24).

Here, press the E2 key.

fig.5-01.e

Changing the Volume

Balance in Dual Play

You can change the volume balance between the two layered sounds in Dual Play (p. 13).

When the Keyboard is turned on, the response is set to “Standard.”

This setting remains in effect until the keyboard’s power is turned off.

While holding down the [Key Touch/Demo

Song] button, press the corresponding

note (C7–E7).

fig.5-04.e

Key Touch/

Demo Song

	C7	E7
	While holding down...
		Press
Key	Description
C7	One of the two layered tones sounds louder.

Key Touch/

Demo Song

While holding down...

Press

C#7	One of the two layered tones sounds
	somewhat louder.
D7	Standard
D#7	The other of the two layered tones sounds
	somewhat louder.
E7	The other of the two layered tones sounds
	louder.

2.To return to the previous condition, while holding down the [Key Touch/Demo Song]

button, press the C2 key.

fig.5-02.e

Key Touch/

Demo Song

While holding down...

Press