Roland F-50 If the Stand is Uneven, When Moving the Instrument, When Disassembling, Caps

Page 7

Introduction

4.Stand the instrument back up.

When lifting the instrument back up, grasp near the center of the F-50, and gently raise the instrument.

If the Stand is Uneven

If after lifting the F-50 back up you find that stand is crooked, try loosening the screws and then securing them again. When retightening, start with the top screws, then work your way down. When doing this, slightly loosen the screws before firmly tightening them.

5.Place the caps over the heads of the screws (four on each side).

Caps

When Moving the Instrument

Disconnect the AC adaptor, cables and the music stand from the F-50.

Then lift the piano while keeping it level, and move it with care, so that you do not drop it on your feet, or get your hands caught.

When Disassembling

Disassemble the unit by carrying out assembly Steps 1-5 in reverse order.

Image 7

Contents Page For the U.K Page Additional Precautions Power SupplyMaintenance PlacementIntroduction Main FeaturesChecking the Included Items Introduction Assembly ProcedureAssembling the F-50 Check the PartsStand the instrument back up When Moving the InstrumentWhen Disassembling If the Stand is UnevenTone Tone Buttons Panel DescriptionsContents Installing the Music Stand Connecting the AC AdaptorBefore You Play Turning On the Power Connecting PedalsTurning Off the Power Min Max Adjusting the VolumeConnecting Headphones Use the Volume knob to adjust the overall volume levelSelecting a Song for Playback Listening to the Demo SongsListening to the Demo Songs Listening to the Demo Songs Using Each TonePress Included in left-hand areas Playing the KeyboardPlaying the Keyboard Layering Two Instrument Sounds Dual PlayAdding Reverberation to Sounds Reverb Effect Recording a Performance Recording Your PerformanceDisabling Buttons Panel Lock Adjust the volumeSome Handy Functions Changing the Keyboard’s TouchLowering/ raising the Reference Pitch Adjusting the Pitch of the Sound Master TuningSome Handy Functions Changing the Depth of the Reverb Effect Changing the Volume Balance in Dual PlaySetting the Reference Pitch to 440.0 Hz Setting the Reference Pitch to 442.0 HzMaking the Connections Connecting to Audio EquipmentRecording procedure About the JacksMidi Out Connector Connecting to Midi DevicesAbout the Midi Connectors Midi In ConnectorReceiving on all Midi channels Omni On/Off Switching Local On/OffSwitching Omni On/Off Connecting to Midi DevicesOff Set the Midi ChannelTransmitting a performance You recorded Midi ChannelCase Cause/Remedy TroubleshootingWhen the F-50 is connected to an external device TroubleshootingKey Song Name Composer Copyright Demo Song ListEb3 Demo Song ListMessage Aux123-127 Roland Digital Piano Main SpecificationsFunctions Assigned to the Keyboard Numerics IndexAfrica InformationAvis 03345901 ’05-2-3N