![](/images/new-backgrounds/1135759/13575963x1.webp)
EQ
The RP255’s EQ helps further shape your tone with Bass, Midrange, and Treble controls. To help get you started, there are four preset EQ curves: Mid Boost (midbst), Scoop (ScooP), Bright (BRight), and Warm (WarM) that can be selected using Knob 1. Bass, Midrange, and Treble parameters range from
EQ Model - Knob 1 selects between 4 different EQ modes (Mid Boost, Scoop, Bright, and Warm), each with different frequency centers for Mid and Treble. Pressing this knob turns the EQ on and off.
Bass - Knob 2 adjusts the amount of low end level (Bass). Mid - Knob 3 adjusts the midrange level.
Mid Freq
Treb - Knob 4 adjusts the high end level (Treble).
Treb Freq
Noise Gate
A Noise Gate is designed to eliminate noise while you are not playing, or provide an auto volume swell effect.
| Gate Model - Knob 1 selects between the DigiTech® noise gate or the volume swell effect. |
| Values include: gate (Selects the noise gate) and swEll (Selects the volume swell effect.) |
| Press this knob to turn the noise gate on and off. |
| Threshold/Swell Sensitivity - Knob 2 sets the signal strength (Threshold) required to |
26 | open or close the Noise Gate, or the Swell Sensitivity for the Auto Swell. Both parameters |