Waveform
Flanger
A Flanger uses the same principle as a Chorus but uses a shorter delay time and adds regeneration (or repeats) to the modulating delay. This results in an exaggerated up and down sweeping motion to the effect. The RP255 includes the following Flanger Effect models: fLangr (the DigiTech Flanger), and mxFLgr (based on an MXR® Flanger).
Knobs 2, 3, and 4 have the following functions for the Flanger models:
Flanger | Knob 2 | Knob 3 | Knob 4 | P5 | P6 |
Model | (Speed) | (Depth) | (Regen) |
| |
|
|
|
| only) | only) |
|
|
|
|
|
|
flangr | Speed | Depth | Regen | Waveform | Level |
|
|
|
|
|
|
mxflgr | Speed | Width | Regen | Manual | |
|
|
|
|
|
|
Phaser (PHaseR)
A phaser splits the incoming signal, and then changes the phasing of the signal. This signal is then taken in and out of phase and mixed back in with the original signal. As the phasing changes, differ- ent frequencies get canceled resulting in a warm sort of twisting sound.
Knobs 2, 3, and 4 have the following functions for the two Phaser models:
Speed - Knob 2 adjusts the rate (Speed) of the modulation. Ranges from 0 to 99.
28