Pioneer VSX-D309 manual Preparations, Setting Up for Surround Sound

Page 14

Preparations

Setting Up for Surround Sound

Be sure to switch the power of this unit on (The STANDBY indicator goes out).

To ensure the best possible surround sound, be sure to complete the following set up operations. This is particularly important when using the 2(Dolby/DTS) sound mode. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers, etc.). Refer to the following pages for detailed descriptions of the settings available for each mode.

1Press RECEIVER to turn the power on.

The STANDBY indicator goes out.

ë￿

MULTI CONTROL

DVD/LD TV/SAT VCR/DVR CD

2Press RECEIVER.

This switches the remote to the surround setup mode.

2

CD-R/

RECEIVER TUNER TAPE/MD TVCONT

 

2DSPMODE MIDNIGHT 5.1CH

1 2 3 4

CHANNEL

TEST

ATT

SIGNAL

SELECT

TONE

SELECT

5

6

7

8

3Press @ or #to select the mode you want to set.

 

LEVEL

EFFECT

 

For best results, start with “SPEAKER setting mode” and make your

CHANNEL

 

 

 

 

9 0

à

ENTER

 

initial adjustments in the order described below.

 

 

10

DISC

 

 

FUNC

 

CH

 

The current settings are displayed automatically.

 

 

 

 

VOL

TV CONTROL

VOL

 

 

 

 

 

SPEAKERS (Front, Center, Surround) setting mode (page 15)

 

FQ

 

 

4

 

ENTER

 

ST

Use to specify the type of speakers you have connected.

 

ST

 

 

MENU

 

 

TOP

 

 

 

MENU

SUB WOOFER ON/PLUS/OFF setting mode (page 16)

 

FQ

 

 

 

1

SOURCE CLASS

MPX

BAND

 

3

7￿

8￿

3

D.ACCESS

CHANNEL

 

1￿ Á￿ 4￿ ¢￿

LOUDNESS FUNCTION MUTING

 

 

 

FL

REMOTE MASTER

 

 

RECEIVER DIMMER SETUP

VOLUME

 

 

AUDIO/VIDEOPRE-PROGRAMMED

REMOTECONTROLUNIT

Use to specify the sub woofer as on or off.

Crossover frequency setting mode (page 16)

Use to determine which frequencies will be sent to the sub woofer (or “Large” speakers if you don’t have a sub woofer).

LFE attenuator setting mode (page 16)

Use to specify the peak level for the LFE channel and the crossover network for rerouted bass frequencies.

Low cut filter ON/OFF setting mode (page 17)

Use to cut the distorted sound from the sub woofer.

FRONT speakers distance setting mode (page 17)

Use to specify the distance from your listening position to your front speaker.

CENTER speakers distance setting mode (page 17)

Use to specify the distance from your listening position to your center speaker.

SURROUND speakers distance setting mode (page 17) Use to specify the distance from your listening position to your surround speakers.

Dynamic range control setting mode (page 18)

Use to compress the dynamic range of the sound track.

Dual mono setting (page 18)

Use with 2 software that has dual mono encoding if you want to isolate one channel or listen in this specialized mono mode..

Coaxial digital input setting (page 18)

Use to specify the input to be assigned to the coaxial digital input.

Optical digital input setting (page 19)

Use to specify the input to be assigned to the optical digital input.

14

4Press %or Þto select the setting you want to set.

The setting is entered automatically.

5Repeat steps 3 and 4 to set other surround modes.

Press ENTER to exit the setting mode.

memo The setting mode is automatically exited if no operation is performed for 20 seconds.

Image 14
Contents VSX-D309 For Canadian model Information to UserImportant Safety Instructions Features Table of Contents Installing the Receiver Checking the Supplied AccessoriesUsing this Manual When Making Cable ConnectionsLoading the batteries Preparing the Remote ControlOperating range of remote control unit Operating other Pioneer componentsUsing external antennas Connecting Your SystemConnecting Antennas Audio/Video cords Connecting Audio ComponentsCassette deck placement Connecting DVD 5.1 Channel Components Connecting Video ComponentsDigital audio cord Connecting Digital ComponentsDigital audio cords/Optical cables Or standard video cordConnecting Speakers Speaker terminalsView of speaker set up Hints on speaker placementOverhead view of speaker set up Do not connect a heater, TV, etcSetting Up for Surround Sound PreparationsSpeaker Front, Center, Surround setting mode LFE attenuator setting mode SUB Woofer ON/PLUS/OFF setting modeCrossover frequency setting mode Press % or Þ to select sub woofer ON, Plus orPress % or Þ to set the distance of the Front Low cut filter ON/OFF setting modeCenter speaker distance setting mode Speakers from the main listening position upDynamic range control setting mode Optical digital input setting 4 ¢To cancel the preset mode at any time Setting Up the Remote ControlRecalling preset codes Press Remote SET UP to exit the preset mode Setting is ON, press Remote SET UP Clearing the Remote Control SettingsTo turn the Direct funtion OFF the default Direct FunctionDisplays & Controls Front PanelSignal Select indicators DisplayReceiver button see Remote ControlMulti Control buttons NUMBER/MODE buttons see pages 33MPX Mode button see TV Power buttonTV Volume +/- buttons Access button seeLearning about the Sound Modes Standard modeSound Modes Advanced Theater modesInput, DTS lights when a DTS signal is input Switching ANALOG/DIGITAL Signal InputDigital lights when a Dolby Digital signal is Playing a SourcePress Signal Select to select Digital Playing Sources with Dolby Digital or DTS SoundPress DSP Mode to select the sound mode Selecting a Sound ModeDSP mode DVD 5.1 ch. input playbackPress Midnight Using Midnight Listening ModeAdvanced Theater mode Dolby Digital/DTS mode MPX mode Using the TunerPress the Tuner button on the remote Control Finding a StationPress the Band button to select either FM or Tuning Directly to a StationMemorizing Stations Press Class to select the class in which Station is stored Recalling Memorized StationsPress Class to select one of the three classes Repeat steps 1 to 4 to memorize up to 30 stationsPrepare the program source Making a RecordingMaking an Audio or a Video Recording Controlling the Rest of Your System CD/MD/CD-R/VCR/LD Player ControlsSearch Cassette Deck ControlsForward search DVD/DVR Player Controls Number buttons+10 button @ STANDBY/ON powerDTV Controls # TV FUNC. TV onlyCable TV/Satellite TV/TV Controls Additional Information TroubleshootingSymptom Cause Remedy FM broadcastsAdditional Information Preset Code List Specifications EIA ListeningPage Page 0 4 2 1 1 4 0

VSX-D309 specifications

The Pioneer VSX-D309 is a versatile and feature-rich home theater receiver that exemplifies Pioneer’s commitment to quality audio and innovative technology. Launched as part of the company’s well-regarded line of audio products, the VSX-D309 is designed to provide an immersive home entertainment experience.

One of the main features of the VSX-D309 is its robust power output, typically delivering 100 watts per channel across five channels. This ample power means that users can enjoy loud and clear audio reproduction, making it a great choice for music, movies, and gaming. The receiver also incorporates Dolby Pro Logic and DTS decoding, allowing it to deliver dynamic surround sound that enhances any audio experience. This technology creates a 5.1-channel surround sound experience from stereo sources, giving users an immersive feeling akin to being in a movie theater.

Another notable characteristic of the VSX-D309 is its comprehensive connectivity options. The receiver is equipped with multiple audio and video inputs, including composite video, S-video, and digital audio options such as optical and coaxial connections. This variety allows users to connect multiple devices, such as DVD players, gaming consoles, and a variety of audio sources seamlessly. Additionally, the receiver features a built-in AM/FM tuner, enabling users to explore a vast array of radio stations.

Pioneer has also integrated their proprietary Advanced Sound Retrieval technology into the VSX-D309. This feature works to restore the audio lost during compression, ensuring a richer and more nuanced sound, particularly in compressed audio formats. Furthermore, the receiver includes adjustable equalization settings, allowing audiophiles to tailor the sound according to their listening preferences and room acoustics.

An essential aspect of the VSX-D309 is its ease of use. The layout of the receiver is user-friendly, with a well-organized remote control that allows users to navigate through settings quickly. The intuitive on-screen display guides users through setup and adjustment, ensuring that even those less familiar with audio equipment can achieve optimal performance.

In summary, the Pioneer VSX-D309 is a capable home theater receiver that combines power, versatility, and user-friendly features. Its robust audio technologies, coupled with an array of connectivity options and advanced sound processing features, make it an excellent choice for anyone looking to enhance their home entertainment system. Whether for casual listening or full home theater setups, the VSX-D309 remains a noteworthy option in Pioneer’s lineup.