Pioneer VSX-D498 Switching ANALOG/DIGITAL Signal Input, Sound Modes, Signal Select

Page 26

Sound Modes

Sound Modes

Switching ANALOG/DIGITAL Signal Input

The input of the component set in the digital input setting (refer to page 19) can be switched to an analog or digital input signal by pressing the SIGNAL SELECT button.

1 Press SIGNAL SELECT on the front panel to select the input signal corresponding to the source component.

Each press switches between ANALOG and DIGITAL signal selection.

SIGNAL SELECT

ANALOG

SIGNAL SELECT

ANALOG

SP A

SIGNAL SELECT

	SIGNAL
	SELECT		SIGNAL	SP A
			SELECT

	DIGITAL		DIGITAL
	DIGITAL

2 While SIGNAL SELECT is set to DIGITAL, AC-3 lights when a Dolby Digital signal is input.

SIGNAL
SELECT		SIGNAL	SP A
		SELECT		When a Dolgy Digital signal is input.

DIGITAL		AC-3
		DIGITAL

AC-3
AC-3

memo

•SIGNAL SELECT is fixed in the “ANALOG” position for components not assigned to one of the three digital input jacks.

•Because the audio from a karaoke microphone and LD recorded with analog audio only is not output from the digital output, set SIGNAL SELECT to “ANALOG”.

•This receiver can only play back Dolby Digital, PCM (32kHz, 44kHz, and 48kHz), digital signal formats. With digital signal formats other than these, set SIGNAL SELECT to “ANALOG”.

26

<ARB7192>

Image 26

Contents Operating Instructions VSX-D498AUDIO/VIDEO MULTI-CHANNELRECEIVER IMPORTANT NOTICE IMPORTANT SAFETY INSTRUCTIONS SET UP OPERATIONInformation to User DAMAGE REQUIRING SERVICE — Unplug this productVarious Surround Effects DSP FeaturesDolby Digital and Dolby Pro Logic Midnight Listening ModePreparations Table of ContentsIntroductory Information Names of Parts and Basic OperationsPower connection AC OUTLET Checking the Supplied AccessoriesHow to Use This Manual Preparing the Remote ControlOperating range of remote control unit Receiver InstallationWhen Making Cable Connections SET UPConnections Using external antennasOutdoor antenna Indoor antenna Vinyl-coatedwire AntennasOPERATION Cassette deck placementAudio Components Connections Connections7Audio/Video cords Video Components Connections7 Front Video deck7Digital audio cords/Fiber-opticcables When playing LD recorded in Dolby DigitalDigital Connections Digital audio cordDVD 5.1 Channel Connection ConnectionsSpeakers connections before connectingthis unit to the AC power source Amplified Sub WooferSurround Speaker placementSub Woofer FrontFront Left Center Right Left4 Press % or ﬁ to select the setting you desire Setting Up for Surround Sound1 Press RECEIVER STANDBY/ON to turn the power on initial adjustments in the order described belowCenter speaker initial setting is “L Large” SPEAKER setting modeFront speaker initial setting is “L Large” Surround speaker initial setting is “L Large”LFE attenuator setting mode SUB WOOFER ON/OFF setting modeCrossover frequency setting mode • Initial setting is “0 dB”CENTER speaker distance setting mode Low cut filter ON/OFF setting modeFRONT speaker distance setting mode SURROUND speaker distance setting modeOptical digital input 1 setting Dynamic range control setting modeCoaxial digital input setting Optical digital input 2 setting5 Press TEST TONE to turn off the test tone 1 Press button3 Press TEST TONE to output the test tone 3SFC DSP mode indicator 1 SIGNAL SELECT indicators2Digital indicators 4ATT indicator=MASTER VOLUME+/–buttons Remote Control9Number buttons/Surround setting buttons Names of Parts and Basic OperationsFront Panel 2STANDBY indicator6TUNING SELECT button 1 STANDBY/ON button@DSP MODE button SIGNAL SELECT button$MASTER VOLUME #MIDNIGHT buttonDolby Surround mode Sound ModesSurround modes DSP modesSound Modes Switching ANALOG/DIGITAL Signal InputSIGNAL SELECT dB MIN to 0 dB MAX 1 Turn on the power of the playback componentPlayback OPERATIONPlaying Sources with Dolby Digital Sound 3 Press to switch the Dolby Surround mode on5 Press VOL +/–to adjust the volume level DIGITALSelect the sound mode Selecting a Sound ModeSurrround operation =HALL 1 = HALL 2 = JAZZ = DANCEPress DVD/LD on the unit DVD 5.1ch Input PlaybackListening in MIDNIGHT Listening Mode Press MIDNIGHTTREBLE +/– BASS +/– Press BASS +/–to adjust the low frequenciesPress TREBLE +/–to adjust the high frequencies OPERATIONFor Manual Tuning Automatic and Manual TuningFor Automatic Tuning When using the front panelTuner Operations Direct TuningTo cancel before inputting the frequency the remote to the tuner operation modeMemorizing Frequently Tuned Stations Using the front panel32 4 1 Tune to the desired station2 Press CLASS repeatedly to select a class Using the remote controlRecalling the Memorized Stations To skip through each channel in orderRecord monitor TAPE 2 MONITOR Other OperationsRecording from Audio Components 1 Select the component you want to recordSIGNAL SELECT Recording from Video ComponentsOther Operations OPERATION44˜¢ Remote Controlling Other PIONEER ComponentsDVD player operations 51˜¡LD player operations Press to switch the LD player on or offpressing this button when the unit is stopped may 4 4˜¢33 CHANNEL +/– TV operations2TV FUNC 4 TV VOL. +/–7 CD DISC+/– Press to switch the CD player on or offCD player operations Press to stop playback7 Number buttons Cassette deck operations5 1˜¡ 7 buttonLaser disc format Additional InformationDolby Digital Comparison with Dolby Pro Logic SurroundAdditional Information TroubleshootingSymptom CauseCause SymptomAdditional Information RemedyAM Tuner Section SpecificationsAmplifier Section Miscellaneous8 0 0 - 4 2 1 - 1 4 • EIA Power cord CAUTIONMaintenance of External Surfaces We Want You Listening For A Lifetime