Pioneer VSX-D498 operating instructions SPEAKER setting mode, @,# %,fi, Preparations

Preparations

SPEAKER setting mode

Establishes the size and configuration of the speaker system you have connected.

In the display, “F”, “C”, and “S” refer to front, center, and surround speakers respectively. Speaker size is denoted as “L” for large speakers, “S” for small speakers, and “∗” (asterisk) if no speaker is connected.

memo If the cone size of your speaker is larger than 5 inches (12 cm), please set to Large.

SOURCE

SELECT

CD	STANDBY/ON	CHANNEL
		STATION
	TV FUNC.	TV VOL.
TAPE	BAND	FREQ.
TUNER	MPX	CLASS	DIRECT
			.ACCESS
DVD
	1	2	3
LD
	4	5	6
TV
CONTROL TEST TONE
	7	8	9
SURROUND	ATT.	CD DISC
	0
FUNCTION		DSP MODE MUTING
CHANNEL
SELECT	LEVEL
RECEIVER			MASTER
STANDBY/ON	EFFECT		VOLUME
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT			Î

@,#

%,fi

1 Press % or fi to set the front speaker.

Front speaker (initial setting is “L (Large)”)

•Select “FL” if your speakers will reproduce bass frequencies effectively or if you did not connect a sub woofer.

•Select “FS” to send bass frequencies to the sub woofer. (The center and surround speakers cannot be set to Large if the front speakers are set to Small. In this case, all bass frequencies are sent to the sub woofer.)

2 Press % or fi to set the center speaker.

Center speaker (initial setting is “L (Large)”)

•Select “CL” if your speaker will reproduce bass frequencies effectively.

•Select “CS” to send bass frequencies to the other speakers or sub woofer.

•Select “C∗” if you did not connect a center speaker. In this case, the center channel is output from the front speakers.

SIGNAL	SP A
SELECT
ANALOG

dB

	2
		2
			SP A
SIGNAL
SELECT
ANALOG

dB

	2
		2
			SP A
SIGNAL
SELECT
ANALOG

dB

* Press # to advance to the next setting, and press @ to return to previous setting.

3 Press % or fi to set the surround speaker.

Surround speaker (initial setting is “L (Large)”)

•Select “SL” if your speakers will reproduce bass frequencies effectively.

•Select “SS” to send bass frequencies to the other speakers or sub woofer.

•Select “S∗” if you did not connect surround speakers. In this case, the sound of the surround channels is output from the front and center speakers.

16

<ARB7192>