Quick start

Power – Install a 9V alkaline or lithium battery (not included).

Set the controls – Volume at minimum, select at #1 and blend at its mid-point.

Plug in – Use standard ¼-inch shielded instrument cables. Place any other pedals after the Aura.

Set trim – Play hard and adjust input trim (right side) so clip/batt LED ﬂashes occasionally.

Select an Image – Raise the volume and audition the 16 Images with the select knob.

Blend to taste – turn left for more pickup and right for more Image.

Kill feedback – If feedback starts, change the position of the phase switch.

Bypass – Step on the footswitch to alternate between blended Image sound and dry pickup (default setting).

Mute – To alternate between blended Image sound and mute, hold the footswitch down until the LED ﬂashes. Repeat to return to bypass.