Fishman Jerry Douglas Signature Series manual Power

Page 16

Power

Power may be supplied by either a 9V battery (battery compartment under pedal) or an approved 9V adapter. Insert a plug into the input jack, and the Aura Imaging Pedal powers up. To conserve the battery, remove the plug from the input when not in use.

For AC power, use the Fishman 910-R (for 110V) or other suitable 9V adapter. The adapter must be filtered, regulated and rated for at least 200mA. It should also accept AC power appropriate for your country. Power Plug requirements: 5.5mm O.D., 2mm I.D., tip = negative.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents User Guide Jerry Douglas Signature Series Aura Imaging Pedal Quick start O U S T I C I M a G I N G About this pedal Word from Jerry DouglasWord from Paul Beard Word from Bil VornDickImages Image Microphone Type DistanceRoyer R-121 Using effects Page Output Left side panel9vdc Input Right side panelTrim Volume Phase switchControl set Select BlendBlend Suggestions Footswitch Mute optional modePower Battery replacement Specifications Page Rev a
Top Page Image Contents