Back Panel Description

See Figure 2 on page 7

	The Showcase Amplifier back panel provides connections for all
	inputs and outputs, remote connection input and output links, and
	the AC power supply.
BALANCED INPUTS	4 Inputs 1-7
	The Showcase Amplifier has seven channel inputs for output
	devices with balanced XLR connectors.
SINGLE-ENDED	5 Inputs 1-7
INPUTS	The Showcase Amplifier has seven channel inputs for output
	devices with single-ended RCA connectors.
	Use only one input to each amplifier channel at a time. You may use
IMPORTANT
	the balanced inputs for some of the amplifier channels and the
	single-ended inputs for the remaining channels.
AMPLIFIER CHANNEL	6 Outputs 1-7
OUTPUTS	The Showcase Amplifier has seven amplifier channel outputs. The
	loudspeaker binding post terminals accept spade lugs, bare wire, or
	pins. Use the red terminal for the positive connection and the black
	terminal for the negative connection.

IMPORTANT	Tighten loudspeaker binding posts by hand only.
BACK PANEL REMOTE	7 12 VDC Remote Power Out
CONNECTIONS	The Showcase Amplifier is equipped with an output that sends 12
	VDC power on/off (12 V trigger) signals to other Krell components
	and other devices that incorporate a 12 V trigger.
	When the component is in the operational mode, the 12 VDC Out pro-
Notes
	vides 12 V of DC output. When the component is in the stand-by mode or
	off, the DC output is 0 V.
	12 VDC Out (12 V trigger) current is limited to 30 mA.

8	Krell Showcase Amplifier