Evolution Technologies MK-416C manual Selecting a Controller For Editing, Assignable Midi Buttons

Evolution MK-425C/449C/461C Advanced User Guide

Assignable MIDI Buttons

ASSIGN	Description	Program	Bank LSB (Press	Data Msb (Press
		(Press Twice)	Twice)	Twice)
0-119	Standard MIDI CC’s	-	Toggle Value 2	Toggle Value 1
120-127	Channel Mode Messages -		Toggle Value 2	Toggle Value 1
128	Pitch Bend Sensitivity	-	Sensitivity value	-
129	Channel Fine Tune	-	Tuning amount	-
130	Channel Coarse Tune	-	Tuning amount	-
131	Channel Pressure	-	Pressure amount	-
132	RPN Coarse	Value	RPN LSB	RPN MSB
133	RPN Fine	Value	RPN LSB	RPN MSB
134	NRPN Coarse	Value	NRPN LSB	NRPN MSB
135	NRPN Fine	Value	NRPN LSB	NRPN MSB
136	Master Volume*	-	Volume LSB	Volume MSB
137	Master Pan*	-	Pan LSB	Pan MSB
138	Master Coarse Tune*	-	Tuning LSB	Tuning MSB
139	Master Fine Tune*	-	Tuning LSB	Tuning MSB
140	Chorus Mod rate**	-	Mod rate	-
141	Chorus Mod Depth**	-	Mod depth	-
142	Feedback**	-	Feedback level	-
143	Send to Reverb**	-	Reverb send level	-
144	Pitch Bend	-	Pitch shift LSB	Pitch shift MSB
145	Program/Bank Preset	Program	Bank LSB	Bank MSB
146	MIDI CC (on/off)	MIDI CC	Button release value Button press value
147	Note (on/off)	Note	Velocity off	Velocity on
148	Note (on/off toggle)	Note	Velocity off	Velocity on
149	MMC Command***	-	Command select.	-
150	Reverb type **	-	Type	-
151	Reverb time **	-	Time	-
152	Chorus type **	-	Type	-
255	Controller Off****	-	-	-

Selecting A Controller For Editing

Before you can assign a MIDI cc to one of the MK-425C/449C/461C’s controllers, you will need to select it for editing. There are 2 methods for doing this:

1.Press CONTROL SELECT. The LCD will display the CONTROLLER symbol. The symbol will be flashing to indicate the controller settings can be altered. The

3-digit display will show the number of the currently selected controller, proceeded by a 'C', or an 'F' if the controller is a fader.

2.Type in the number of the controller using the numeric keypad, or the +/-

buttons.

or

Move a fader/rotary controller.

Simply moving a fader/rotary controller will make it the currently selected controller, ready for editing.

It is not possible to select any of the 10 numerical buttons by pressing them, since during edit mode, they are used to enter numerical values. To program these buttons, please use the first method. We have given the buttons 0 to 9 the following numbers for the selection process: MK-425C = 11-20, MK-449C = 20-29, MK-461C = 24-33 respectively.

5