Evolution
Assigning RPN/NRPN To A Fader/Rotary Controller
Note: For a detailed description of RPN/NRPN data see section RPN/NRPN’s Explained on page 12.
1. Select the desired control as described earlier.
2. Press “CONTROL ASSIGN” twice and while the display is flashing, enter controller 132 for RPN coarse, 133 for RPN fine, 134 for NRPN coarse or 135 for NRPN fine.
3. Press “DATA MSB” twice to assign the number for the RPN/NRPN MSB.
4.Press DATA LSB twice to assign the number for
RPN/NRPN LSB.
5. Press “CHANNEL ASSIGN” to assign the MIDI channel the message should be sent on.
You will find most data sheets for synths that make use of NRPN’s will give the MSB and LSB values that you should enter into DATA MSB and DATA LSB banks (also see Appendix F). However, some manuals may only give the hex values.
The
Press the Dec button to convert it to a decimal value.
Alternatively, use the look up table in Appendix C.
8