Genz-Benz 80 LT Shenandoah Stereo 80LT, Engineering Specifications, Inputs, Amplifier Output

	SHENANDOAH® STEREO 80LT
	ENGINEERING SPECIFICATIONS
INPUTS
XLR Balanced input impedance:	2.2 k ohms
XLR Balanced input sensitivity:	-60 to -30 dBV
¼” Unbalanced input impedance:	300 k ohms
¼” Unbalanced input sensitivity:	-30 to +4 dBV
AMPLIFIER OUTPUT
Power at 4 ohm load:	40 watts per side RMS, 80 watts total
THD + N (preamp):	<0.035%
THD + N (power amp):	<0.07%
Frequency response:	20 Hz -20 kHz +/- 1dB
CHANNEL EQUALIZATION
Low frequency:	125 Hz shelving, +/-15dB
Mid frequency (sweep):	250 Hz - 5 kHz , peaking, +/-12dB
High frequency:	8 kHz shelving, +/-15dB
DIRECT OUTPUTS
XLR balanced output level:	-30 dBV nominal
XLR balanced output impedance:	150 ohms
¼” unbalanced output level:	+4 dBv nominal
¼” unbalanced output impedance:	1k ohm
DIGITAL EFFECTS
Processor type:	WAVE FRONT™ STEREO DSP engine
Internal processing:	24 bit
A/D converter	24 bit - 64X oversampling
D/A converter:	24 bit - 128X oversampling
Dynamic Range:	80 dB
THD + N (1 kHz)	<0.01%
Sampling rate:	48 kHz

Due to continuing product improvements and changes, all specifications are subject to change without notice.