FM65 DSP Amplifier, Front Panel, Rear Panel

FM65 DSP Amplifier

tone and world-standard Fender® technology:

•65 Watts into 8 ohms

•Digital Signal Processing

•16 Effects “FX” settings

•16 Amplifier “TYPE” settings

•1 Classic Fender® clean tone (Channel-1)

•2 Channels—independent settings and sounds

•Footswitch (included)—enables remote channel switching and effects bypass

•Closed-back cabinet—increases bass response

•Auxiliary Input—connect your MP3/CD player or drum machine for accompaniment

Thank you for choosing Fender®

World's most popular instrument ampliﬁers—since 1946.

Front Panel

Channel-1

Channel-2

A.INPUT— Plug your guitar in here.

B.CHANNEL SELECT— Press to switch channels (see Footswitch {N}:

C.CHANNEL LED— Indicates the active channel:

CH 1

CH 2

D.CH 1 VOLUME—Adjusts the loudness of Channel-1.

E.TREBLE / BASS—Adjusts the high- and low-frequency tone characteristics of Channel-1.

F.GAIN—Controls preamp volume and signal distortion, except when Acoustic is the selected Amp Type {H}.

G. CH 2 VOLUME— Use to set the loudness of Channel-2 after adjusting GAIN {F}.

H.AMP TYPE—Select one of 16 core amplifier circuits for Channel-2 (see next page).

NOTE: Use the extreme flexibility of the Amp Type knob wisely! Treble harshness or boomy bass tones can be avoided by using the right guitar settings and playing style for a particular amp type.

I.TREBLE/MIDDLE/BASS—Adjusts the high- mid- and low-frequency tone characteristics of Channel-2.

J. FX SELECT—Selects the active effect (see next page).

K.FX LEVEL—Adjusts the intensity of the active effect.

L.AUX IN— RCA input jacks for connecting your MP3/CD player, drum machine, or other sound source. Use the sound source volume control to adjust the loudness of this input. NOTE : The AUX signal will be muted if noth- ing is plugged into the instrument input {A}. Plug in your guitar with its volume turned down if desired.

M.HEADPHONES—Connect your headphones here for pri- vacy. This jack can also be used as an output to sound equipment. The FM65 DSP speaker is automatically dis- abled when this jack is used.

Accepts a standard 1/4" (mono or ste-

reo) headphone plug.

N.FOOTSWITCH— Connect the included 2-button footswitch here with the supplied cable to enable remote channel selection and effects bypass. NOTE: The CHANNEL SELECT {B} button is disabled when the footswitch is connected. If you need a longer footswitch cable, use (unshielded) speaker cable rather than (shield- ed) guitar cable.

O.POWER LED— Indicates when the amplifier is ON.

Rear Panel

P. POWER SWITCH—Switches the amplifier

ON–OFF.

Q. POWER CORD SOCKET— Connect to a grounded outlet using the included power cord in accordance with the voltage and frequency ratings specified on the rear panel of your amplifier.

6	f e n d e r . c o m