Pioneer VSX 416 and VSX 516 Models: Specifications and Features
Page 46

11Additional information

Resetting the main unit

Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this.

1Switch the receiver into standby.

2While holding down the TONE button,

press and hold the STANDBY/ON button for about three seconds.

3When you see RESET? appear in the display, press the ENTER button.

OK? shows in the display.

4Press SETUP to confirm.

OK appears in the display to indicate that the receiver has been reset to the factory default settings.

Switching the speaker impedance

We recommend using speakers of 8 Ω with this system, but it is possible to switch the imped- ance setting if you plan to use speakers with a 6 Ω impedance rating.

•With the receiver in standby, press the SPEAKER IMPEDANCE button.

Each time you do this, you switch between the impedance settings:

•SP 6 OHM – Use this setting if your speakers are rated at 6 Ω.

•SP 8 OHM – Use this setting if your speakers are rated at 8 Ω or more.

Power cord caution

Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it

46

with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement

Specifications

Amplifier section

•Continuous power output (stereo)

Front . . . . . . . 100 W (DIN 1 kHz, THD 1.0 %, 8 Ω)

•Power output (surround)

Front

. . . . . 100 W per channel (1 kHz, THD 1.0 %, 8 Ω)

Center . . . . . . . . . . 100 W (1 kHz, THD 1.0 %, 8 Ω) Surround. . . . . . . . . . . . . . . . . .100 W per channel (1 kHz, THD 1.0 %, 8 Ω)

Surround Back (VSX-516 model only)

. . . . . 100 W per channel (1 kHz, THD 1.0 %, 8 Ω)

Audio section

•Input (Sensitivity/Impedance)

CD, DVR/VCR, CD-R/TAPE/MD,

DVD/LD, TV/SAT. . . . . . . . . . . . . . . .200 mV/47 kΩ

•Frequency response

CD, DVR/VCR, CD-R/TAPE/MD, DVD/LD,

TV/SAT. . . . . . . . . . . . . . . 5 Hz to 100 000 Hz dB

•Output (Level/Impedance)

DVR/VCR REC, CD-R/TAPE/

MD REC . . . . . . . . . . . . . . . . . . . . . 200 mV/2.2 kΩ

•Tone control

Bass . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (100 Hz) Treble . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (10 kHz) Loudness . . . . . . +10 dB/+5 dB (100 Hz/10 kHz)

(at volume level –50 dB)

•Signal-to-Noise Ratio DIN (Continuous rated power output / 50mW)

CD, DVR/VCR, CD-R/TAPE/MD,

DVD/LD, TV/SAT. . . . . . . . . . . . . . . . . 88 dB/64 dB

En

Page 45 Page 47
Image 46
Page 45 Page 47
Contents VSX-416-S/-KVSX-516-S/-K Important the Moulded Plug Operating EnvironmentVentilation Caution Contents Before you start Introduction to home theater Minute guide02 5 minute guide Chapter Listening to Surround SoundMinute guide Using the Quick Setup EnterQuick surround sound setup Quick surround sound setup ChapterQuick surround sound setup Other problems during Auto McaccConnecting up Chapter Connecting upMaking cable connections Use a coaxial digital audio cable for the connection.1 Connecting up Connecting a TV and DVD playerDVD player Audio and Video inputs on this receiver.2 Connecting upConnecting the multichannel analog outputs Satellite and cable receivers, and terrestrialAbout the WMA9 Pro decoder Connecting up Connecting other audio componentsCD-R, MD, DAT, Tape recorder, etc Connecting other video components DVR, VCR, LD player, etcUse a PAL connector to connect an external FM antenna Connecting up Connecting antennasUsing external antennas To improve FM receptionConnecting up Connecting the speakers Front speakersVSX-416 model Hints on speaker placementSpeaker terminals VSX-516 modelExtra Power mode speaker setup Speaker placement diagramsFollowing illustrations show a 6.1 channel speaker setup.1 Controls and displays Chapter Controls and displaysFront panel Controls and displays Controls and displays Display Loudness Remote controlStereo MidnightADV.SURR Volume +Receiver TOP MenuDisplay 10 /ENTERONE Touch Copy ClassAuto playback Listening to your systemListening to your system Chapter Listening in surround soundUsing the Advanced surround effects Setting the effect optionsListening to your system Listening with Acoustic Calibration EQ Press EFFECT/CH SEL again to adjust other settingsListening in stereo While listening to a source, press Shift +Using surround back channel processing Choosing the input signalUsing Virtual Surround Back VSB VSB OFF Virtual Surround Back mode is switched off Using Midnight and LoudnessEnhancing dialog Press Tone to select the frequency you want to adjust Listening to your system Using the tone controlsUsing the Sound Retriever Press S. Retriever to switch the sound retriever on or offUsing the System Setup menu System Setup menuSystem Setup menu Chapter Manual Mcacc speaker setupFine Channel Level System Setup menuFine Speaker Distance Copying your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ automaticallyAcoustic Calibration EQ Setting the Acoustic Calibration EQ manually Checking your Acoustic Calibration EQ settingsUsing To check the settings Manual speaker setupSpeaker setting Select SP SET from the SP Setup menuChannel level Input Assign menuCrossover network Speaker DistanceDual Mono Setup Other setup menuDynamic Range Control Setup LFE Attenuator SetupSaving station presets Using the tunerUsing the tuner Chapter Listening to the radioSearching for RDS programs Using the tuner An introduction to RDSDisplaying RDS information Press Display for RDS informationUsing the tuner Using EONMaking recordings Chapter Making recordingsMaking an audio or a video recording USB playback Chapter Using the USB interfaceUSB playback Basic playback controlsOther compatibility information USB playbackCompressed audio compatibility About MPEG-4 AACAdditional information TroubleshootingConnecting up on Additional information ChapterOr Plus Additional informationAre set for surround back sound Noise during playback of aSpecifications Additional information Resetting the main unitPower cord caution Amplifier sectionCleaning the unit Condizioni ambientali di funzionamento AttenzioneAvvertenza PER LA Ventilazione Neo6 sono marchi di fabrica Digital Della Dolby LaboratoriesTheater Systems, Inc Indice Prima di cominciare Ascolto del suono surround Guida di 5 minutiPresentazione del sistema home theater Vedi a Collegamento degli altoparlanti a paginaPremere Enter per confermare la configurazione Uso della Configurazione rapida’illustrazione mostra il modello VSX-516 Impostazione rapida suono surround Impostazione automatica del suono surround McaccAltoparlanti Selezionare Check OK sul display e quindi premere EnterCavi audio analogici CollegamentoCome collegare i cavi Cavi audio digitaliCollegamento di un lettore DVD e di un televisore Usare un cavo audio digitale coassiale per il collegamento.1Collegamento delle uscite analogiche multicanale Audio e Video sul ricevitore.2Informazioni sul decoder WMA9 Pro Ingressi audio liberi su questo ricevitoreCollegamento di altri componenti video Audio e Video su questo ricevitorePer migliorare la ricezione FM Collegamento delle antenneUso delle antenne esterne Per migliorare la ricezione AMCollegamento degli altoparlanti Modello VSX-416 Terminali degli altoparlantiSuggerimenti per l’ubicazione degli altoparlanti Modello VSX-516Diagrammi di posizionamento degli altoparlanti Pannello anteriore Signal SelectControlli e display Controllo Multi JOG16  STANDBY/ON EON Mode Presa Mcacc Setup MICTasti Listening Mode Controlli del menù System SetupSB Solo per il modello VSX-516 Spie Signal Select’illumina quando è attiva la selezione di segnale Auto ’illumina quando viene rilevato un segnale audio digitaleTelecomando Acoustic EQ* Shift + Solo per il modello VSX-516 RECEIVERTasti Receiver Control Tasti Input SelectorTasti di controllo DVD/DVR 10 /ENTERConfermare e uscire dallo schermo di menu attuale Tuner Premere per accedere al menuAscolto con il suono surround Ascolto del sistemaRiproduzione automatica Premere Standard durante l’ascolto della fontePro Logic IIx Music Vedi sopra Uso degli effetti surround AdvancedImpostazione delle opzioni relative agli effetti EffectAscolto con la funzione Acoustic Calibration EQ Ascolto stereoDurante l’ascolto di una fonte, premere Shift + Acoustic EQ Impostazione standard SB on Come scegliere il segnale d’ingressoUso dell’elaborazione del canale posteriore surround Ad ogni pressione, la selezione cambia come segueEnfatizzazione dei dialoghi Uso delle modalità Midnight e LoudnessVSB OFF La modalità Virtual Surround Back è disattivata Riproduzione di altre fonti Uso dei controlli del tonoUso della funzione Sound Retriever Premere Tone per selezionare la frequenza da regolareUso del menu System Setup Menù System SetupSelezionare ‘M.MCACC’ dal menù System Setup Al termine, premere Return Livello canale ottimoDistanza ottimale dei diffusori ’unità ritornerà al menù d’impostazione manuale McaccCopiatura delle impostazioni Acoustic Calibration EQ Attendere il termine della funzione EQ Auto SetupCalibratura acustica EQ Della funzione Acoustic Calibration EQ sottoUsare / per selezionare C1 o C2 Impostazione manuale della funzione Acoustic Calibration EQControllo delle Impostazioni Acoustic Calibration EQ Usare / per selezionare il canaleDimensione degli altoparlanti Configurazione manuale degli altoparlantiSelezionare SP SET dal menu SP Setup Impostazione degli altoparlantiDistanza dell’ altoparlante Menù Input AssignRete Crossover Livello del canaleImpostazione Dual Mono Menu di impostazione OtherImpostazione di controllo della gamma dinamica Impostazione LFE AttenuatorCome salvare le stazioni di preselezione Come usare il sintonizzatoreAscolto della radio Come denominare le stazioni preselezionateRicerca dei programmi RDS Un’introduzione al sistema RDSVisualizzazione delle informazioni FreqUtilizzo della funzione EON EON.4Come fare le registrazioni Come fare una registrazione audio o videoControlli di base per la riproduzione Riproduzione USBUso dell’interfaccia USB Premere USB SHIFT+CD Collegare il dispositivo USBInformazioni sul formato MPEG-4 AAC Compatibilità dell’audio compressoAltre informazioni sulla compatibilità Informazioni su WMAConsultare Impostazione degli altoparlanti a pagina 35 per Informazioni addizionaliLocalizzazione dei guasti Centrali Controllare le impostazioni degli altoparlantiPer il suono surround posteriore Assenza di audio dagliLfeatt Specifiche Ripristino dell’unità principalePrecauzione riguardante il cavo d’alimentazione Commutazione dell’impedenza dell’altoparlantePulizia dellunità Pioneer Corporation

VSX-416-K, VSX-516-S, VSX-516-K specifications

The Pioneer VSX-516-S, VSX-516-K, and VSX-416-K are a series of AV receivers that showcase Pioneer's commitment to delivering high-quality home entertainment experiences. These models are designed to cater to both audiophiles and casual listeners, offering a range of features and technologies that enhance audio and video playback.

One of the standout features of the VSX-516 series is its multi-channel amplification, providing robust power for various speaker configurations. Both the VSX-516-S and VSX-516-K boast a 7.1 channel setup while the VSX-416-K offers a 5.1 channel configuration. This allows users to create immersive surround sound environments ideal for movies, music, and video games. The receivers support various audio formats including Dolby Digital and DTS, ensuring high fidelity sound reproduction.

In terms of technologies, these receivers incorporate Advanced Sound Retriever technology. This feature enhances compressed audio files by restoring lost details, making even standard MP3 files sound closer to their original recordings. Additionally, the receivers come equipped with a variety of DSP (Digital Signal Processing) modes, allowing users to select from multiple presets that tailor sound characteristics for different types of content, from concert performances to gaming.

Connectivity is also a significant aspect of the VSX series. The VSX-516-S and VSX-516-K offer multiple HDMI inputs, enabling seamless connection to various high-definition devices such as Blu-ray players and gaming consoles. All models support 1080p video upscaling, providing users with an enhanced visual experience by improving lower resolution content to near HD quality.

The user-friendly interface is another noteworthy characteristic. The on-screen display simplifies navigation through settings and features, making it accessible for users of all technical levels. Each model also includes a remote control for convenient operation, along with a manual setup process for optimizing speaker placement and audio performance.

In conclusion, the Pioneer VSX-516-S, VSX-516-K, and VSX-416-K are versatile AV receivers loaded with features that enhance both audio and visual quality. With their powerful amplification, advanced sound technologies, extensive connectivity options, and user-friendly design, these models are excellent choices for anyone looking to elevate their home entertainment experience. Whether for movies, music, or gaming, these receivers deliver robust performance, making them a valuable addition to any home theater setup.
Top Page Image Contents