Nady Systems W1KUHTBAND1, W1KULTBAND1 Quick User Controls Guide, 1KU Receiver Front View

Quick User Controls Guide

W-1KU Receiver: Front View

GROUP CHANNEL VOL

1 2 8 9 10 11 12

7

3

GROUP CHANNEL VOL

3 4 5 6

1.AF/PEAK LED TREE Shows audio level—the RED LED indicates maximum audio level allowable

2.LCD DISPLAY For indication of GRP (00-09)/CH (00-99), Volume Levels (0-63), A-B Diversity, and RF signal strength indicator 1-6 bars

3.DIVERSITY A/B INDICATORS Indicates A or B receiver active when transmitter is on

4.FREQUENCY GROUP Indicates selected frequency group from 00-09

5.FREQUENCY CHANNEL Indicates selected frequency channel from 00-99

6.OUTPUT VOLUME CONTROL Indicates selected output volume level range from 00-63

7.RF SIGNAL METER Indicates received signal strength level from 1-6 bars

8.SET To scroll LCD menu and set the selected program/function

9. UP BUTTON To change the receiver output VOL level, GRP/CH up by one step at a time DOWN BUTTON To change the receiver output VOL level, GRP/CH down by one step at a time

10.IR Infrared LED transmitter window for linking the RX to the TX for frequency download

11.SYNC BUTTON Press to make the IR link download the receiver’s selected frequency to the TX. Positioning the HT-1KU/BT-1KU transmitters’ IR window 6”-12” away from the RX IR window, press the SYNC button once and wait one second for the RX to respond.

If the IR data download is successful the RX will show all six RF LCD bars and one of the Diversity antenna icons on the LCD display.

12.POWER BUTTON Press for one second to turn receiver ON-OFF

4