Nady Systems PAS-250 manual Specifications

	SPECIFICATIONS
AMPLIFIER AND SPEAKER SYSTEM
POWER		.250W RMS @ 6 Ω, 1%THD at 1kHz
S/N RATIO		56.5dB
THD		≤0.17% @1kHz ≤0.63%@1kHz
SPEAKERS		3” Woofer, 6Ω
FREQUENCY RESPONSE		100kHz - 18KHz (±3dB)
SENSITIVITY @ INPUT & OUTPUT
• Mic/Line		-37dB
• Max Input Level XLR		.-16dBv
• Max Input Level 1/4”		+9dB
• Max Output Level XLR		26dB
EQUALIZATION	Single knob, clockwise increases treble; counter-clockwise increases bass
POWER REQUIREMENTS		100-120 VAC, 220-240 VAC, 50-60Hz
DIMENSIONS (H X W X D		8.6” x 35.8” x 3.5” (21.8cm x 90cm x 9cm)
WEIGHT		20bs. (8.8 Kg)

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifiications for this unit, including design and appearance, are subject to change without prior notice.

SERVICE FOR YOUR NADY AUDIO PRODUCT

Please do not return our product to the store where it was purchased. Nady Systems, Inc. assumes the responsibility of keeping you a satisfed customer.

DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY.

If factory service is required, please call our Service Department at 510/652-2411 or e-mail service@nady.com for a return authorization (RA) number. Make sure the RA number is clearly marked on the outside of the package. If unit is past the One Year Warranty, The Nady Service Department will provide a quote for service or replacement. Please make sure a cashier’s check or money order is enclosed (if not prepaid with credit card) with the shipment to Nady.

If unit is within the One Year Warranty from purchase, please check Warranty terms for further instruction before sending in unit.

Nady Systems will not repair nor be held responsible for any units sent without proper identifcation and return address or RA number clearly marked on the package.

For service, please ship units prepaid to:

Nady Systems, Inc., Service Department, 6701 Shellmound St., Emeryville, CA 94608

9