Nady Systems SRM-10X owner manual E C I F I C At I O N S

S P E C I F I C AT I O N S

Setting: MONO OUT, +4dBm/400Hz, All Pots at MID, Master at MAX.

1. INPUT SECTION

Input	Connector	Input Impedance		Nominal Level	Max Level
MONO CH MIC	XLR	1.3K	Ω	-28 dBm	-1.0 dBm
MONO CH LINE	1/4" TRS	11K	Ω	-10 dBm	+17 dBm
STEREO CH LINE	1/4" TRS	10K	Ω	-10 dBm	+10 dBm
STEREO TAPE IN	RCA PIN JACKS	10K	Ω	-9 dBm	+8 dBm
AUX RETURNS	1/4" TS	5K	Ω	-11 dBm	+8 dBm

2. OUTPUT SECTION

Output	Connector	Output Impedance		Nominal Level	Max Level
STEREO OUT L/R	1/4" TS	210	Ω	+4.6 dBm	+20 dBm
AUX SENDS	1/4" TS	210	Ω	-22.2 dBm	-6.4 dBm
CNTRL R. OUT	1/4" TS	22	Ω	-19.4 dBm	+20 dBm
REC OUT	RCA PIN JACKS	1K	Ω	-10.6 dBm	+4.8 dBm
PHONES	1/4" TRS	22	Ω	+19.4 dBm	22mW X 2

3. FREQUENCY RESPONSE	8. HUM AND NOISE
ANY INPUT TO	Residual Output Noise	-73.7 dBm
ANY OUTPUT	20Hz ~ 20kHz +/-3 dB S/N Ratio	-93.3 dBm

4. TOTAL HARMONIC DISTORTION

ANY INPUT TO

ANY OUTPUT 0.08%

5. INPUT CHANNEL EQUALIZATION

High	12k, +/-15 dB, Q fixed at 2 oct.
Low	80 Hz, +/- 15 dB, Q fixed at 2 oct.
Low Cut (High Pass)
filter (Mono channels only)	75 Hz, -3 dB (18 dB/octave)

6. GAIN CONTROL RANGE

Mono input channel

trim control	40 dB
Channel/Master gain controls	+14 dB from 0 dBm
Aux Send	+12 dB from +4 dBm

9. VU METERS

6-segment LED X 2 (+7 to -10) L/R

10. PHANTOM POWER

+48 VDC, globally selected

11. POWER REQUIREMENTS

External PSU, 120 VAC/60Hz or 230 VAC/50Hz

12. POWER CONSUMPTION

16.2 Watts, External PSU

13. DIMENSIONS AND WEIGHT

8.125" x 1.625" x 9" (206 mm x 41 mm x 228.6 mm), 3.30 lbs (1.5 Kg), External PSU not included

7. CROSSTALK @ 1KHZ

ADJACENT CHANNEL INPUTS	..................................-100 dB
INPUT TO OUTPUT	-40.6 dB

The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.

12