Specifications
BALANCED XLR MIC INPUTS CH. 1-2
Maximum Total Gain (EQ’s @ mid): +63dB
Maximum Input: +6.5dBu
Input Impedance: 1.2kΩ
Sensitivity:
BALANCED TRS LINE INPUTS CH. 1-2
Maximum total gain (EQ’s @ mid): +42dB
Maximum Input: +17dBu
Input Impedance: 15kΩ
Sensitivity:
BALANCED MONO/STEREO ¼” LINE INPUTS CH.
Input Impedance: 20kΩ (10kΩ mono mode)
Sensitivity: +6dBu nominal
STEREO RCA LINE INPUTS CH. 3-4
Maximum Total Gain (EQ’s @ mid): +15dB
Maximum Input: +13dBu/ +10dBV
Input Impedance: 10kΩ
Sensitivity: +2dBu/ 0dBV
EQUALIZER
Low, Mid and High EQ’s: +⁄- 15dB @ 100 Hz, 2.5kHz, 12kHz
Low Cut Switch:
AUX RETURN, BALANCED, STEREO ¼”
Maximum Total Gain (EQ’s @ mid): +10dB
Input Impedance: 12kΩ
Sensitivity: +17dBu
AUX SEND ¼” OUTPUT
Maximum Output: +23 dBu
Output Impedance: 100Ω
MAIN UNBALANCED L/R STEREO OUTPUTS Maximum Output: +17dBu
Output Impedance: 100Ω
¼” CONTROL RM/ HEADPHONE OUTPUTS Maximum Output (into 10k Ω load): + 17 dBu Maximum Power: 112mW (into 32Ω load)
Output Impedance: 500Ω
1⁄8”
1⁄8”
STEREO RCA TAPE INPUTS
Maximum Total Gain: +17dB
Input Sensitivity: +2dBu
Input Impedance: 10kΩ
STEREO RCA TAPE OUTPUTS
Maximum Output: +14dBu
Output Impedance: 1kΩ
DIGITAL I/O
USB: B style connector for USB 1.0 or higher.
Optical Input: TOSLINK (S/PDIF)
Optical Output: Coaxial for 75Ω cable (S/PDIF)
GENERAL
Phantom Power: +48VDC, globally selected
Frequency Response: 20Hz – 22kHz (+⁄- 3dB)
THD: <.1%
S/N Ratio:
Noise Floor: 200uV (all controls at mid)
AC/AC Power Adapter: Input 115VAC / 60Hz
Output 21VAC 800mA
Weight: 2.65 lbs. (1.2 Kg)
Dimensions (HWD): 2.1” x 6.75” x 8.3” (53 x 171 x 211mm)
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit, including design and appearance, are subject to change without prior notice.
10