Specifications, Service | Nady Systems UHF 10 specification

SPECIFICATIONS

	Frequency Response	UHF 10 TRANSMITTERS
	50 Hz - 15 KHz, +/– 3 dB	Audio Inputs
	Dynamic Range	UB-10 Bodypack: 3.5mm
	120 dB	locking mini-jack 3-way select
	Total Harmonic Distortion	switch for inputs: instrument,
< 0.6%		headworn mic, or lavalier mic
	RF Carrier Frequency Range	UH-10 Handheld: Integral Nady
	UHF, choice of single frequencies	DM-10D neodymium dynamic
	from 794-820 MHz	cartridge
	Frequency Stability	Controls
	+/– 0.005% crystal controlled	UB-10: OFF/STANDBY/ON,
	Modulation	INSTRUMENT/HEADWORN
	FM (F3E), +/– 20 KHz	MIC/LAV MIC, INPUT LEVEL
	Operating Range	UH-10: OFF/STANDBY/ON
	250 feet typical–up to 500+ feet line-	LED Indicator
	of-sight	Unit “ON” (single flash), Low
	UHF 10 RECEIVER	Battery Alert (steady)
	UHF 10 RECEIVER	RF Power Out
	Reception Mode	50mW nominal (maximum allowed
	DigiTRU Diversity™ (Dual Antenna)	by FCC)
	Squelch	Harmonic & Spurious Emissions
	Tone Key (32.768 KHz), External	< –50 dB
	Control	Battery
	Controls	9V Alkaline
	Power ON/OFF, Volume Control,	Battery Life
	Squelch (Mute) Adjust	8-10 Hours (35mA draw typical)
	Connectors	Dimensions
	DC in, 1/4”(6.3 mm) unbalanced	UB-10: 4.2” x 2.5”x .88”
	phone jack (750 mV/5K Ohm), XLR	(10.7 x 6.4 x 2.2 cm)
	balanced output (60 mV/600 Ohm)	UH-10: 9.5”x 1.37”
	LED Indicators	(24.1 x 3.48cm)
	Power ON, Diversity A/B, Audio	Weight
	Peak	UB-10: 3 oz (84g)
	Unwanted Signal Rejection	UH-10: 7.5 oz (210g)
	60dB image and spurious
	Power Requirements
	DC 12-15V @ 300 mA, AC/DC
	adapter included
	Dimensions
	16”x 9.4”x 1.73”
	(41.0 x 24.0 x 4.4 cm)
	Weight
	1.15 lb (0.52 Kg)
11

Nady wireless systems are type accepted under FCC rules, parts 90, 74 and 15.

This device complies with RSS-210 of Industry & Science

Canada. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interence that may cause undesired operation.

SERVICE

(U.S.) Should your Nady UHF 10 Wireless Microphone System require service, please contact the Nady Service Department via phone at (510)

652-2411 or e-mail to service@nadywireless.com for a Return Authorization (R/A) Number and a service quote (if out of warranty). Make sure the R/A Number is clearly marked on the outside of the package and enclose a cashier's check or money order (if not prepaid with a credit card). Ship the unit prepaid to: Nady Systems, Inc., Service Department, 6701 Shellmound Street, Emeryville, CA 94608. Include a brief description of the problems you are experiencing.

(International) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product.

The warranty card enclosed with this system contains additional valuable warranty and service information. Keep it in a safe place for future possible reference. Do not attempt to service this unit yourself as it will void the warranty.

UHF 10 specifications

Nady Systems has long been recognized for its innovative audio solutions, and their UHF 10 wireless microphone system exemplifies the brand’s commitment to quality and performance. Designed for a variety of applications, the UHF 10 system is ideal for live performances, presentations, and studio recordings, ensuring that users enjoy crystal-clear audio without the limitations of traditional wired microphones.

One of the standout features of the Nady UHF 10 is its use of ultra-high frequency (UHF) technology. This allows for a wide frequency spectrum, enabling users to select from up to 16 different frequencies within a 540 to 570 MHz range. This flexibility not only enhances the system's ability to minimize interference from other wireless devices but also provides a reliable signal over long distances. The UHF 10 is renowned for its impressive range, which can reach up to 250 feet, making it suitable for events of various sizes.

The Nady UHF 10 is equipped with a true diversity receiver, meaning it features two antennas that work to eliminate dropouts and ensure a consistent signal. The ability to switch between the two receivers in real-time provides users with uninterrupted audio, crucial for performances where every word matters. Additionally, the system has a rear-panel balanced XLR output and a 1/4" unbalanced output, allowing for easy integration with different audio equipment.

Another significant characteristic of the UHF 10 system is its lightweight and ergonomic design. The transmitter is comfortable to hold during extended use, and the microphone head is constructed to capture vocal nuances accurately, enhancing the overall performance quality. The system includes both handheld and bodypack transmitters, providing versatility for various microphone needs—from speeches to music performances.

Durability is also a key aspect of the UHF 10, designed to withstand the rigors of active use. The components are built to last, ensuring that the system can handle the demands of frequent transport and setup. Additionally, the rechargeable batteries provide convenience and sustainability, making it easy for users to keep their equipment powered throughout the day.

In summary, Nady Systems' UHF 10 is a comprehensive wireless microphone solution equipped with advanced UHF technology, true diversity reception, and a user-friendly design. Whether for stage performances, events, or studio recordings, the UHF 10 offers reliability and high-quality audio that professionals have come to trust.

SPECIFICATIONS

UHF 10 TRANSMITTERS

UHF 10 RECEIVER

SERVICE

UHF 10 specifications