SK 2 bodypack transmitter
Operating controls
ON/OFF button
Operation and battery status indication, red LED Microphone/instrument input,
3.5mm jack socket (lockable) Antenna (can be screwed off) Battery compartment cover
MIC/INST slide switch Serial number
Channel selector switch CH (1 to 4) Sensitivity control GAIN
Type plate Belt clip
Inserting/replacing the battery
We recommend powering the bodypack transmitter by a 9 V PP3 alkaline battery (IEC 6 LR 61). If powered by a rechargeable 9 V battery, the operating time will be drastically reduced.
Open the battery compartment by first sliding the battery compartment cover in the direction of the arrow. Then flip the battery compartment cover open.
Insert the battery as shown. Please observe correct polarity when inserting the battery.
Close the battery compartment.
Note:
When the red LED goes off during operation, you must replace the battery as soon as possible.
20