SKM 3 radio microphone

Operating control

Sound inlet basket

Locking ring of battery compartment Body of radio microphone

Battery compartment (not visible from outside)

Antenna (can be screwed off)

Operation and battery status indication, red LED (POWER)

ON/OFF switch

Channel selector switch CH (1 to 4) Type plate

Serial number

Note:

The microphone head of the radio microphone cannot be changed.

Inserting/replacing the battery

We recommend powering the radio microphone by a 9 V PP3 alkaline battery (IEC 6 LR 61). If powered by a rechargeable 9 V battery, the operating time will be drastically reduced.

Turn the locking ring of the battery compartment in the direction

of the arrow.
Pull the body of the radio microphone	in the direction of the
arrow as far as it will go.

Insert the battery as shown. Please observe correct polarity when inserting the battery.

Close and lock the radio microphone.

Note:

When the red LED goes off during operation, you must replace the battery as soon as possible.