ON SCREEN INSTALLATION (CONT’D)
After the initial installation, you may want to later access the installation features, for example, if you have moved the dish.The following sections describe the steps in the Installation menu.
To access the installation menu:
Press the MENU button on the remote.
Choose Installation by using the ▼ button to highlight this option. Press OK.
Follow instructions beginning with enter zip code on page 19.
VCR CONTROLLER (DSX 5375R ONLY)
VCR Controller Set Up
(DSX5375R only)
This section describes how to select a VCR Brand,VCR Code, and make sure it all works.
To access the installation menu:
Highlight your VCR Brand in the list of VCR manufacturers using the ▲ or ▼ buttons. Using PAGE+/- buttons will move through the list more quickly. Press OK
Use the ▲ or ▼ buttons to highlight VCR Code. Press OK
Select the first code, if more than one, in the list. Press OK
Using the ▲ or ▼ buttons, select Test and press OK.
A message will appear asking for a blank tape to be inserted, the VCR to be tuned to the correct input channel, and power turned off. Follow the instructions and press OK
A sequence of events will occur to power on the VCR, record a program, stop recording, and power off the VCR.
Power on the VCR, rewind the tape, and press play to see if a recording was made.
If recording is not sucessful, select the next code in the VCR code list, press OK, and return to step 4. Repeat these steps as necessary.
| If recording is still not successful, check the VCR controller, |
Banner Recording | cord, and connection to the receiver. Make sure the VCR |
controller is positioned in front of the VCR infrared sensor. |
(DSX5375R only)
Allows the information banner to be turned on or off at the beginning of the recording.
Use the ▲ or ▼ buttons to highlight Banner
Recording. Press OK.
If you want the banner to be recorded, select Yes using the ▲ or ▼ buttons and press OK.
If you do not want the banner to be recorded, select No using the ▲ or ▼ buttons and press OK.
21
