INSERTING YOUR ACCESS CARD
The access card provided with your system includes information about your purchase
authorization and other data.To watch channels, your viewing access card needs to be inserted in the access card slot on the rear of your Satellite Receiver.
When the card is removed, the system will not display any programming guides or video signal.The message, "Please insert your Access Card" will show on the TV screen.
The access card only needs to be inserted during sys- tem setup and generally does not need to be removed. Each access card has a unique number. Be sure to record this number in the space
provided on the back cover of this manual.
Hold the card with the arrow facing upwards and pointing toward the slot in the Satellite Receiver rear panel.
Gently push the card into the slot until it meets the stop. Do not use undue force when inserting. The end will be visible outside of the slot.
Keep your access card permanently inserted in your Satellite Receiver.
Connect one end of the AC power cord to the Satellite Receiver’s AC IN jack. Connect the plug end to an AC outlet.This will turn unit on.
REPLACING THE ACCESS CARD
When replacing the access card, the system will prompt you with instructions. Gently remove the card from its slot. If you have to reinsert the card, you should have the ARROW facing forward into the box and the GOLD CHIP facing down. Push the card into the slot as far as it will go, the end will be visible out- side of the slot.
The old card passes information to the new card, and then the old card no longer functions.
Caution
s• YOUR ACCESS CARD IS FRAGILE.
•ALWAYS INSERT CORRECTLY AND CAREFULLY.
•DO NOT BEND.
•DO NOT REMOVE AND
•NEVER SUBMERGE IN LIQUID OR APPLY CLEANING FLUIDS.
VCR controller output (DSX3575 only)
Secondary Audio/Video Outputs (DSX5353 and DSX5375 only)
SMART HELP
Once the Satellite Receiver is powered on, 
the Installation Wizard will appear on your TV
screen.You should then proceed to the Installation Wizard details on page 19.
Note:The Installation Wizard will remain on the screen only for a few minutes and needs to be accessed as quickly as possible.This screen will ONLY appear the very first time your Satellite Receiver is in use.
Next, go to Switching your Satellite Receiver On and Off on page 13.
12
