CONNECTING TO YOUR EXISTING EQUIPMENT (CONT’D)
Unplug all equipment from the AC outlet before making connections.
If you have a
TV and a VCR
Refer to the illustration at right:
Connect the Satellite Receiver A/V jacks to the VCR’s A/V IN jacks. Connect the red cable to the red jacks, the white cable to the white jacks, and the yellow cable to the yellow jacks.
Connect the VCR’s A/V OUT jacks to the TV’s A/V IN jacks.
Connect TV,VCR or other equipment to AC outlet.
Switch on your TV first and select the
VCR controller output | Secondary Audio/Video Outputs | ||||||||
(DSX3575 only) | (DSX5353 and DSX5375 only) | ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| R | L |
VCR controller cable |
| Video cable |
| Audio | |
|
| |
Rear of VCR | cables | Rear of TV |
AUDIO | ANT | |
L |
| IN |
OUT | IN |
|
R 
VIDEO
OUT
appropriate channel or A/V mode depending on the connection chosen in step 2. Refer to the user manuals for your TV and VCR to select proper channel or A/V mode (AUX/VCR,
LR |
IN | LLR |
| L |
AUDIO
L 
OUT IN
R 
OUT IN
ANT |
|
LL | IN |
| |
R |
|
CH3 CH4
IN
Connecting the VCR
Controller (DSX 5375R only)
Refer to the illustration:
Connect the VCR Controller cable to the VCR CONTROL jack on the Satellite Receiver.
Place the VCR Controller under and in front of the VCR close to the sensor.
Your VCR Controller is now ready to be set up for your VCR
VIDEO
OUT
CH3 CH4
OUT IN
VHF/ U HF
IN
Video cable
|
|
| VIDE | O | |
|
| L |
| ||
|
|
| |||
|
|
|
|
|
|
Audio cables |
| A U | DI O | ||
R | R |
| |||
Smart Help
• If the audio and video jacks on 
your TV are not
on the Satellite Receiver to the audio/video in jacks on the TV. Connect right jacks to right jacks, and left jacks to left jacks.
•If your VCR or TV does not have audio and video jacks, use RF coaxial cables for connec- tions instead. Connect the RF coaxial cable to the TV/VCR jack on the Satellite Receiver and to the RF or ANTENNA IN jack on the VCR.
Then, connect a second RF coaxial cable to the ANTENNA OUT or RF OUT jack of the VCR and to the ANTENNA IN, RF in, or UHF/VHF IN jack of the TV.
Next, go to Inserting Your Access Card on page 12.
11
