Connecting the mains unit

to the front panel of the central unit.

AF OUT

BAL/UNBAL

DC IN	LEV 6dBu MAX
12V/150mA

To mount two central units into a rack:

Place the two central units side by side upside-down onto a flat surface.

Align the jointing plate	over the holes in the bottom sides of the central
units.
Secure the jointing plate	to the central units using eight of the supplied

recessed head screws (M 3x6).

Hook the two rack mount “ears” to the front panels of the central units.

Secure the rack mount “ears” to the central units using two of the sup- plied recessed head screws (M 3x6) respectively.

Slide the central units into the 19” rack.

Secure the rack mount “ears” to the rack.

To mount only one central unit into a rack: Hook the two rack mount “ears”

Secure the rack mount “ears” to the central unit using two of the supplied recessed head screws (M 3x6) respectively.

Secure the blanking plate to one of the rack mount “ears” using two of the supplied recessed head screws (M 6x10).

If you are not front mounting the BNC output connector, insert the two

blanking plugs

into the holes of the blanking plate.

Slide the central unit into the 19” rack.

Secure the rack mount “ears” to the rack.

Connect the supplied mains unit to the socket (DC IN). Use the cable grip to secure the power supply DC cable.

Connect the suitable adapter to the mains unit .

Connect the mains unit to the mains. The device switches on automatically.

AF OUT

BAL/UNBAL

DC IN	LEV 6dBu MAX
12V/150mA

Connecting the amplifier

The audio outputs are available as a balanced XLR-3M output and an unbalanced BNC output , allowing you to simultaneously connect two devices (amplifier, etc.). Both outputs deliver the same output voltage, are short-circuit proof and decoupled from each other.

Connect the amplifier/mixing console to the balanced XLR-3M output

or the unbalanced BNC output .

For details on balanced or unbalanced connection, see “Connector assign- ment” on page 12.