Sennheiser MO 2000 Set instruction manual Operation, Service, Intended use of the device

Page 5

Operation

This device must be operated only from the type of power supply indicated on the type plate. Observe correct polarity!

Never push objects of any kind through openings of this device as they may touch dangerous voltage points or short-out parts that could result in fire or electric shock.

Ensure sufficient ventilation. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Do not install near any heat sources such as central heating radiators, electric heaters, stoves, or other devices that produce heat (e.g. amplifiers). Keep the device away from direct sunlight and similar sources of heat.

Only use attachments/accessories specified by Sennheiser.

Use the device in dry rooms only. Do not expose the device to dripping or splashing and ensure that no objects filled with liquids, such as vases or coffee cups, are placed on the device. Do not use the device near water or liquids.

Should a spillage occur, unplug the device and have it checked by a techni- cian.

Service

No user serviceable parts inside! Do not attempt to service devices yourself as opening or removing covers may expose dangerous voltage or other hazards. If devices are opened by customers in breach of this instruction, the warranty becomes null and void.

Refer all servicing to qualified service personnel. Servicing is required if a device has been damaged in any way, such as mains cable or plug damage, liquid has been spilled, objects have fallen inside, the device has been exposed to rain or moisture, does not operate properly or has been dropped.

Intended use of the device

“Intended use” means that the device should be used within the operating conditions and limitations described in this instruction manual. “Improper use” means using the device other than as described in this instruction manual, or under operating conditions which differ from those described herein.

3

Image 5
Contents Overload Page Contents Rack mounting Safety instructionsUse of the MO 2000 CU central unit Intended use of the device ServiceOperation MO 2000 Set Delivery includes Overload LED Product overview MO 2000 SetPutting the system into operation Setting up the deviceFitting the device feet Rack mountingConnecting the amplifier Connecting the mains unitSwitching the central unit on/off Connecting the optical microphoneAdjusting the sensitivity Overload indicationAccessories Care and maintenanceTo clean the MO 2000 CU central unit Cat.-No. AccessoryMO 2000 H optical microphone SpecificationsMO 2000 CU central unit Frequency response curve Connector assignmentConnection fiber optic cable extension optional Optical transducer optionalManufacturer Declarations WarrantyCE Declaration of Conformity Statements regarding FCC and industry CanadaPage