Sennheiser SKM 5200 manual After switch-on, Displaying the menu settings in display mode

Page 16

After switch-on

After switch-on, the standard display is shown on the display panel. Depending on the setting, the transmission frequency, the channel number or the name of the radio microphone is displayed.

Displaying the menu settings in display mode

In display mode, and with the lock mode activated, you can display the current menu settings one after the other (see “Overview of the operating menu” on page 21). After a few seconds, the display returns to the standard display. With the lock mode activated, the LC display is not backlit.

UP

SET

DOWN

Slide the multi-function switch to the position (UP) or (DOWN) to display the menu settings. If you slide the multi-function switch repeatedly to the same position, all menu settings are displayed one after the other.

Changing to the selection mode

To change from display mode to selection mode, you have to deactivate the lock mode.

Deactivate the lock mode (see “Deactivating the autolock function temporarily” on page 16). You can now select the menu whose settings you want to adjust.

Press the multi-function switch (switch position SET) to change to the menu that was displayed in display mode.

Selecting a menu

UP

SET

DOWN

Slide the multi-function switch to the position (UP) or (DOWN). Press the multi-function switch (switch position SET).

The name of the selected menu starts flashing.

18

Page 15 Page 17
Image 16
Page 15 Page 17
Contents
SKM Contents Safety instructions Safety instructions for handling rechargeable batteriesDelivery includes SKM 5200 radio microphoneIntended use of the radio microphone Improper use of the radio microphoneChannel bank system VariantsSKM Suitable receiversOperating controls Operation and battery status indication Indications and displaysTransmitter activity indication Display backlightingInserting, removing and changing the power pack Preparing the radio microphone for useInserting batteries into the B 5000 battery box LC display shown on the example of the B 5000-1 battery boxRecharging the BA 5000 battery pack AdapterChanging the microphone head PatternModel Type Pick-up Switching the radio microphone on/offAppears on the display panel Doing a frequency check When switching on the device, keep the red button depressed Identifying the radio microphone Operating menu ButtonsSwitch Automatic lock mode autolock functionDeactivating the autolock function temporarily Working with the operating menu TuneAfter switch-on Displaying the menu settings in display modeChanging to the selection mode Selecting a menuAdjusting a setting Changing to the setting mode of a selected menuFollowing menus are available Menu Function of the menu Storing a setting Exiting the operating menuOverview of the operating menu Chan SET VARVocal RF Adjustment tips for the operating menu Selecting a channel ChanSET Adjusting the microphone sensitivity Atten Entering a name NameLoading the factory-preset default settings Reset Adjusting the low-cut frequency LowcutSelecting the standard display View Activating/deactivating the automatic lock mode Exiting the operating menu ExitError checklist If problems occurProblem Possible cause Possible solution Tips for optimum reception Maintenance and careTips for multi-channel operation Specifications Accessories Manufacturer declarations
Top Page Image Contents