Sennheiser SKM 5200 Inserting batteries into the B 5000 battery box, Adapter, Compartment Charger

Page 9

Inserting batteries into the B 5000 battery box

To ensure the longest operating time possible, only use alkaline manganese batteries for the B 5000 battery box.

To open the battery box, push down the display section of the battery box .

Insert the batteries. Observe correct polarity when inserting the batteries.

Close the battery box.

LC display shown on the example of the B 5000-1 battery box

y 3-step LC display for remaining battery capacity.

yIf the battery capacity is too low

(LOW BAT), the last segment starts flashing and the batteries must be changed.

Recharging the BA 5000 battery pack

Before using the BA 5000 battery pack for the first time or if you have not used it for several weeks, you must charge the battery pack completely.

The L 50 charger can charge two BA 5000 battery packs simultaneously.

Place the appropriate

charging

adapter

in the

charging

compartment

of the charger.

Insert the BA 5000 battery pack into the charging adapter . Charging time: approx. 2.5 hrs with the L 50 charger (dependent on the residual charge of the battery pack).

11

Page 8 Page 10
Image 9
Page 8 Page 10
Contents
SKM Contents Safety instructions for handling rechargeable batteries Safety instructionsSKM 5200 radio microphone Delivery includesIntended use of the radio microphone Improper use of the radio microphone Variants Channel bank system SKM Suitable receiversOperating controls Indications and displays Operation and battery status indicationTransmitter activity indication Display backlightingPreparing the radio microphone for use Inserting, removing and changing the power packLC display shown on the example of the B 5000-1 battery box Inserting batteries into the B 5000 battery boxRecharging the BA 5000 battery pack AdapterPattern Changing the microphone headSwitching the radio microphone on/off Model Type Pick-upAppears on the display panel When switching on the device, keep the red button depressed Doing a frequency checkIdentifying the radio microphone Buttons Operating menuAutomatic lock mode autolock function SwitchDeactivating the autolock function temporarily Tune Working with the operating menuDisplaying the menu settings in display mode After switch-onChanging to the selection mode Selecting a menuChanging to the setting mode of a selected menu Adjusting a settingFollowing menus are available Menu Function of the menu Exiting the operating menu Storing a settingChan SET VAR Overview of the operating menuVocal RF Selecting a channel Chan Adjustment tips for the operating menuSET Entering a name Name Adjusting the microphone sensitivity AttenAdjusting the low-cut frequency Lowcut Loading the factory-preset default settings ResetSelecting the standard display View Exiting the operating menu Exit Activating/deactivating the automatic lock modeIf problems occur Error checklistProblem Possible cause Possible solution Maintenance and care Tips for optimum receptionTips for multi-channel operation Specifications Accessories Manufacturer declarations
Top Page Image Contents