Pioneer SC-07, SC-05 manual Other Settings Chapter, Input Setup menu, Component

12Other Settings

Chapter 12:

Other Settings

The Input Setup menu

You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according to the default settings (see Input function default and possible settings on page 93). In this case, you need to tell the receiver what equipment is hooked up to which terminal so the buttons on the remote control correspond to the components you’ve connected.

6 Select the input(s) to which you’ve connected your

component.

For example, if your DVD player only has an optical

output, you will need to change the DVD input function’s

Digital In setting from COAX-1(default) to the optical

input you’ve connected it to.The numbering (OPT-1to 4)

corresponds with the numbers beside the inputs on the

back of the receiver.

• If you change the setting to an input that has been

previously assigned to another function (for example,

						INPUT
RECEIVER	MAIN		SOURCE			AUDIO
						PARAMETER
	ZONE2	3				EXIT
		MULTI				TOP MENU
		OPERATION
						BAND
DVD	BD	DVR1	DVR2	SOURCE	RCV	ST
				TV
VIDEO1	VIDEO2	VIDEO3	TV	VOL		CATEGORY
HOME MEDIA			CH		VOL
						HOME
GALLERY	CD	CD-R	PHONO			MENU
						iPod CTRL
						STATUS
HDMI	TUNER	XM	SIRIUS	TVCONTROL

1Switch on the receiver and your TV. Use RECEIVER to switch on.

MUTE MUTE

VIDEO

TUNE PARAMETER

TOOLS

MENU

T.EDIT

ENTER ST

RETURN

TUNE

PHASE CTRL CH LEVEL

TV/SAT), then the setting for that function will

automatically be switched off.

• If your component is connected via a component

video cable to an input terminal other than the

default, you must tell the receiver which input

terminal your component is connected to, or else you

may see the S-Video or composite video signals

instead of the component video signals.1

7 When you’re finished, proceed to the settings for

2Set the operation selector switch to RCV, then press

HOME MENU.

An on-screen display (OSD) appears on your TV. Use / // and ENTER to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

3Select ‘System Setup’ from the HOME MENU.

4Select ‘Input Setup’ from the System Setup menu.

4.SystemSetup			4b.Input Setup
A/V RECEIVER				A/V RECEIVER
a.Manual SP Setup
		INPUT	:	DVD
b. Input Setup		Input Name	:	Default
c. OSD Language		Digital In	:	COAX-1
d. Other Setup
		HDMI Input	:	---
		Component In	:	Comp-1
		12V Trigger1	:	OFF
		12V Trigger2	:	OFF
		PDP In (SR+)	:	OFF
Exit	Return	Exit			Finish

5Select the input function that you want to set up. The default names correspond with the names next to the terminals on the rear panel (such as DVD or VIDEO 1) which, in turn, correspond with the names on the remote control.

other inputs.

There are three optional settings in addition to the

assignment of the input jacks:

• Input Name – You can choose to rename the input

function for easier identification. Select Rename to

do so, or Default to return to the system default.

	4b.Input Setup				4b.Input Setup
		A/V RECEIVER				A/V RECEIVER
				INPUT	:	DVD
INPUT	:	DVD
Input Name	:	Default		Input Name	:	Rename
Digital In	:	COAX-1		Digital In	:	COAX-1
HDMI Input	:	---		HDMI Input	:	---
Component In	:	Comp-1		Component In	:	Comp-1
12V Trigger1	:	OFF		12V Trigger1	:	OFF
12V Trigger2	:	OFF		12V Trigger2	:	OFF
PDP In (SR+)	:	OFF		PDP In (SR+)	:	OFF
Exit			Finish	Exit			Finish

•12V Trigger 1/2 – After connecting a component to one of the 12 volt triggers (see Switching components on and off using the 12 volt trigger on page 70), select MAIN, ZONE 2, ZONE 3 or OFF for the corresponding trigger setting to switch it on automatically along with the (main or sub) zone specified.

•PDP In (SR+) – To control certain functions on this receiver from a flat panel TV, select the display input to which you’ve connected the receiver.2

8 When you’re finished, press RETURN. You will return to the System Setup menu.

Note

1 For high-definition video (using component video connections), or when digital video conversion is switched off (in Setting the Video options on page 98), you must connect your TV to this receiver using the same type of video cable as you used to connect your video component.

2You will have to make an SR+ cable connection from a CONTROL OUT jack on the display to the CONTROL IN jack on this receiver (opposite from the setup in Using this receiver with a Pioneer flat panel TV on page 70). Note that to control this receiver using the remote, you will have to point it at the flat panel TV’s remote sensor after making this connection.

92

En