SIMPLE SRM SETUP WITH MONITORS
1.Connect a microphone to a Mic input jack and any keyboard or other instrument to a Line input jack.
2.Next, connect speaker cords from the PA 1 Out jacks to the main speakers and from the PA 2 Out jacks to the monitor speakers.
3.The level control in each channel strip adjusts the amount of signal sent to the main bus where all channel signals are summed. The Main control in the master section adjusts the volume level to the main speakers. The Monitor control in each channel strip adjusts the amount of signal sent to the monitor bus where all monitor channel signals are summed. The Monitor control in the master section adjusts the volume level to the monitor speakers.
4.Be sure to turn the tape deck, keyboard or other instruments and gear on first, then the SRM 6302 / 8302.
10
